UART
•
One at front panel
•
Physical interface using SA-Adapter™ via 10-pin connector
•
RS232..RS422, isolated or not
•
Only full duplex operation for RS422
•
Data rates up to 1 Mbit/s
•
FIFO receive and transmit buffers for high data throughput
•
Handshake lines: full support; lines depend on SA-Adapters™
•
SA-Adapter™ has to be installed at the factory
Mass Storage
Serial ATA (SATA)
•
One port for onboard 2.5" hard-disk drive
•
Transfer rates up to 150MB/s (depends on hard disk)
•
RAID level 0/1 support (depends on CPU board)
Miscellaneous
CompactPCI® J1 is assembled for increased mechanical stability and/or for power supply
Electrical Specifications
Supply voltage/power consumption:
•
+5V (-3%/+5%), 600mA typ. (w/o hard disk)
•
+3.3V (-3%/+5%), 1.6A typ. (w/o hard disk)
MTBF: 1,290,994h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
Dimensions: conforming to CompactPCI® specification for 3U boards
Mountable on right (standard) or left (option) side of the CPU
Weight: 150g (w/o hard disk and SA-Adapters™)
Environmental Specifications
Temperature range (operation):
•
-40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
•
Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 1g/10..150Hz
Conformal coating
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support
Driver software can be found in the data sheet of the CPU board that you use.
