RS3 - IP67 Industrial Ethernet Switch

High-speed non-blocking, store-and-forward switching

Eight 10/100Base-T ports at front panel (Electrical isolation: 1500 Vrms)

Port configuration: copper, 10/100 Mbit/s

Auto-negotiation / Auto MDI/MDIX crossover on all ports / manual configuration possible

Layer2-based Policy Control List

8K MAC address lookup table with automatic learning and aging

Up to 4096 VLANs

Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol to ensure loop free topology formation

Reducing multicast traffic in the network through multicast snooping - IGS (IPv4) and MLDS (IPv6)

Management Firmware System Features

Saving and restoring user configurations

Software upgrades through TFTP

System logs (syslog) and e-mail alerts for critical events

Remote monitoring (RMON) and alarm generation

Displaying the running configuration in the form of CLI commands

Management interfaces through
• CLI (RS232 console, Telnet, SSH)
• SNMP v3

Switch configuration can be loaded from external dongle

Management Firmware Security Features

User authentication using 802.1x

Controlling management access through SNMP and CLI only from authorized managers

MAC based access list (ACL) for traffic filtering

Rate-limiting and storm control to prevent packet flooding from malicious peers

Supported Protocols and Standards

DHCP client / server / relay (IEEE 1394)

Ethernet flow control (IEEE 802.3x)

GARP (VLAN-aware bridging)

GVRP/GMRP support (IEEE 802.1D, 2004)

Hypertext Transport Protocol (HTTP) Server for Remote Management and Monitoring (RFC2626)

HTTP Secure (HTTPS) - HTTP-based Remote Management over encrypted data channel (RFC2818)

IGMP snooping / IGMP proxy / IGMP Querier / MLD Discovery (RFC 4541)

Link aggregation LACP / EtherChannel (IEEE 802.3ad, 2005)

Link Layer Discovery Protocol LLDP (IEEE 802.1ab, 2005)

Multiple Spanning Tree (MSTP) (IEEE 802.1s)

Path MTU Discovery Protocol (PMTUD) (RFC 1984)

Priority-based switching, Quality of Service/DiffServ, tagged frames, Layer2-based 801.1Q VLAN-ID packet routing (IEEE 802.1p)

Port-based authentication with EAP (IEEE 802.1x - REV2004/RFC3748)

Rapid Spanning Tree Protocol (RSTP IEEE 802.1w)

Remote Network Monitoring Information Base v1 (RFC2819)

Secure Shell (SSH) for Remote Configuration (CLI) over secure channel

Secure Sockets Layer - Encrypted Data Exchange (RFC5246)

SNMP v1, v2c, v3 management

Syslog (RFC 5424)

TCP/IP v4 and v6

TFTP (RFC 1350)

VLAN/port-based VLANs GVRP/MVRP (IEEE 802.1Q Rev D5.0, 2005)

Service Interface

M12 connector at front

RS 232 / V24

I2C interface for external dongle

Front I/O

Eight Ethernet ports via M12 connectors

One service interface via M12 connector

One power input via M12 connector

Link and activity Ethernet status LEDs (2 per channel)

Status LEDs for power, reset and error codes

Electrical Specifications

Power input
• Nominal input voltage 24 VDC (9 to 36 V) according to EN50155

EN50155 power interruption class S2

Isolation (according to EN50155)
• 1500 Vrms

Power consumption: 5 W

Mechanical Specifications

Dimensions: 220 mm x 130 mm x 70 mm (without connectors)

Prepared for wall or DIN-rail mounting with special mounting plates (available separately)

Weight: 1.9 kg

Environmental Specifications

Temperature range (operation):
• -40..+70°C (+85°C) with up to 85°C for 10 minutes according to class Tx (EN50155)
• Airflow: natural convection

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300 m to + 3000 m

Shock: 50 m/s², 30 ms (EN 61373)

Vibration (function): 1 m/s², 5 Hz - 150 Hz (EN 61373)

Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz (EN 61373)

Conformal coating on request

Climatic tests according to EN50155 and EN68068

Fully EN 50155-compliant (Power Interruption Class 2, Temperature Class Tx)

IP67 compliant

MTBF

669 843 h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

Flammability
• PCBs manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to the following railway standards:
• EN50121 (radio disturbance)
• EN61000-4-2 (ESD)
• EN61000-4-3 (radiated disturbances)
• EN61000-4-4 (burst)
• EN61000-4-5 (surge)

Conforming to e1 requirements of the German Federal Motor Transport Authority

Tested according to the following automotive standards:
• CISPR25/CISPR16 (radiated emission)
• ISO7637-2 (conducted emission - power line)
• ISO7637-2 (conductive immunity - power line)
• ISO7637-3 (capacitive immunity - signal line)
• ISO11452-2, ISO11452-5 (radiation immunity)
• EN50121 (radio disturbance)

Software Support

Firmware for configuration and management included

Electrical Specifications

Other nominal input voltages: 36, 48, 72, 96 or 110 VDC
• Wide input range (according to EN50155): 0.7 x nominal voltage < nominal voltage < 1.25 x nominal voltage

Article No.	Description	More
06RS03-00	Managed, 8x 100BaseT, PSU 24/48V, -40...+70°C screened, EN50155 class Tx compliant, IP67	Photo

Article No.	Description	More
06RS04-00	Unmanaged, 8x 100BaseT, PSU 24/48V, -40..+70°C screened, EN50155 class Tx compliant, IP67	More info Photo

Article No.	Description	More
05RS01-00	DIN-Rail mounting plate for MIPIOS® family, -40..+85°C	Photo
05RS01-01	Wall-mounting plate for MIPIOS® family, -40..+85°C	Photo
05RS01-02	I2C Dongle for MIPIOS® Switch, 32Kb, M12, -40..+85°C	Photo
05RS01-03	Cable set for MIPIOS® RSx and 19" rack-mountable SFx switches, consisting of: 4 Ethernet cables (M12 to RJ45), 1 service adapter (M12 to D-sub), 1 service cable, 1 dongle adapter (D-Sub to M12), 1 power cable (M12 to open end), -40..+85°C	Photo

Article No.	Description	More
Firmware/BIOS
14ETSW-00	Ethernet Switch Firmware for managed RSx, SFx and F302 models	Download Details

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
06RS03-DS	RS3 Data Sheet (PDF)	Download
Compare Chart rugged MIPIOS® products		Download
Compare Chart Ethernet switches for different platforms		Download
20RS03-00	RS3 User Manual (PDF)	Download
21ETSW-ER	14ETSW-00 Managed Ethernet Switch Firmware Errata (PDF)	Download
21ETSW-00	Managed Ethernet Switch Quick Start Guide (PDF)	Download
21ETSW-01	Managed Ethernet Switch Command Line Interface User Manual - Command Reference (PDF)	Download