AE51 - Graphics and I/O Interface for Display Computers

Front I/O

2 DisplayPort® interfaces
• AUX channels and hot plug detection
• USB channels optional

HD audio
• HD audio codec (Realtek ALC268)
• Audio stereo in
• Audio stereo out
• SPDIF out
• Via 10-pin onboard connector

2 Gigabit Ethernet
• Via M12 connectors

1 USB 2.0
• Via Type A connector

2 SA-Adapter™ slots for serial I/O
• 1 UART or IBIS, GPS
• 1 UART or CAN bus

8 status LEDs
• 4 for Ethernet link and activity status
• 2 for general board status
• 2 for power supply status

2 PCI Express® Mini Card slots

For functions like WIFI, WIMAX, GSM/GPRS, UMTS

2 SIM card slots

PCI Express® and USB interface

Accelerometer / Magnetometer

3 acceleration channels
• 2 independent programmable interrupt generators for free-fall and motion detection

3 magnetic field channels
• ±1.3 to ±8,1 gauss magnetic field full-scale

Miscellaneous

Gold Cap to buffer real-time clock on connected SBC board

Electrical Specifications

Isolation voltage:
• Ethernet ports: 1,500 VDC
• DC/DC: 1,500 VDC

Supply voltage:
• 24 VDC nom. (9 to 36 V)
• EN 50155 power interruption class S2

Power output: 12 VDC nom.

Power consumption: Up to 30 W

Mechanical Specifications

Dimensions: approx. 170 mm x 132 mm x 30 mm

Weight: approx. 100 g

Environmental Specifications

Temperature range (operation):
• 0..+60°C up to -40..+85°C (screened)
• Fanless operation

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300 m to +3,000 m

Shock: 50 m/s², 30 ms

Vibration (function): 1 m/s², 5 Hz - 150 Hz

Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz

Conformal coating on request

MTBF

tbd. @ 40°C according to IEC/TR 62380 (RDF 2000)

EMC

Conforming to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)

Prepared for certification according to e1 requirements of the German Federal Motor Transport Authority

HD audio
• Ribbon cable adapter to 9-pin D-Sub front I/O connector

Antenna connectors
• For functions like WIFI, WIMAX, GSM/GPRS, UMTS in combination with PCI Express® Mini Card(s)
• Reverse SMA connector

Mass Storage

Serial ATA (SATA)
• One port for external hard-disk/solid-state drive

Miscellaneous

3-axis accelerometer and 3-axis magnetometer

Electrical Specifications

Input voltage 36 VDC nom. via front connector (alternate internal PSU)

Input voltage 12 VDC via optional onboard power bypass connector

As the product concept is very flexible, there are many other configuration possibilities. Please contact our sales team if you do not find your required function in the options. Please note that some of these options may only be available for large volumes.