Rugged Computer Boards and Systems for
Harsh, Mobile and Mission-Critical Environments

Home > Products > 10F019P60

CompactPCI/Serial/PlusIO

VMEbus

Computer-On-Modules (COM)

Networks & Connectivity

Collect your favorite products in My MEN!

10F019P60 VxWorks® 6.7 BSP (MEN) for F19P

Overview
Downloads

Download

Download this article

Version

Current release: See history

Last modified: See history

License

MEN general licensing conditions

This article is not free of charge. Please contact us for pricing and ordering options.

Features

Supported Operating System

VxWorks® 6.7

VxWorks® 6.7 SMP

Supported MEN Boards

F19P

Supported Features

CPU
• Celeron® and Core 2 Duo processor

Memory
• DDR3 SDRAM

Graphics
• VGA
• DVI on side-card connector

Mass Storage
• SATA on side-card connector
• CompactFlash® via USB

I/O
• USB, 10 channels
• USB keyboard
• Ethernet: 3 Gigabit Ethernet

PCI Express®

PCI Bus

Real-time clock support

Boot
• On-board EEPROM for bootline storage
• Boot via network, SATA disk or USB

Unsupported Software Features

Off-board interrupts and onboard USB EHCI interrupt under SMP with BIOS revisions <= 1.15

Included Documentation

target.ref documentation and readme in zip file

Revision History

===== [ History of fileset ART/10F019-60/10F019-60 ] =====


-----[ Rev_2.0_0 ]-----
[ 2010-10-01 11:44:46 by UFranke ]
BSP 2.0/0
 R1: BIOS Rev 1.15 wrong MP tables
     high interrupt load 84% under SMP
     unpredictable result for SMP of board IRQs
 M1: added geiShow() for debugging not for fix
     please read README_MEN.txt for workaround
 R2: taskDelay() in SMP mode 20% to long
 M2: changed APIC_TIMER_CLOCK_HZ from 333MHz to 266MHz    configInum.h
 R3: EEPROM dump missing
 M3: EEPROM dump added    itl_core2_gen/sysSmb.c
 R4: missing features
 M4: added TIMESTAMP, WINDVIEW
 R5: SMP long startup delay
 M5: USB EHCI BIOS workaround added

-----[ Rev_2.0_00beta ]-----
[ 2010-09-17 09:56:40 by UFranke ]
Revision 2.0/0 beta
 switched from miscowabic to WindRiver BSP itl_core2
 F019-00 supported only

-----[ Rev_2.0_3beta ]-----
[ 2010-03-01 08:14:09 by ufranke ]
BSP 2.0/2beta3
   F19 support only - see README_MEN.txt also
   R: support on SATA port 0,2,3 missing
   M: added /ahci0a /ahci0c /ahci0d
   R: missing ICH9M support
   M: added PCI ID
   R: SMI enabled for BIOS USB boot
   M: disable SMI by setting IO port at 0x430
   R: support AHCI controller on XM2 (ICH9)
   M: add ICH9 IDs to ahciControllerList[ ]
   R: no F602 support
   M: prepared for F602 support for
      IRQ jitter measurement
   R: missing __build_env.txt__
   M: added
   R: log timeout if not IDE controller
   M: local version of atadrv with only 3s timeout
   sysSmb.c
   R: page fault if EEPROM is empty
   M: defaulting size
   R: F19/XM2 not supported
   M: SMB controller PCI device ID added
   R: XMxx EEPROM address not supported
   M: XMxx EEPROM address 0xAA added
   R: EEPROD2 not supported
   M: EEPROD/EEPROD2 auto detection added
   vxbIntelAhciStorage.c
   R: detect not all disks on F19P/XM2
   M: support gaps between connected SATA ports
   R: pointer errors
   M: fixed
      01i,09jun09,z_l  Fix stack overflow issue. (WIND00169290)
   bootrom.bin
   R: to less lower memory
   M: exclude EHCI

-----[ Rev_2.0_2beta2 ]-----
[ 2009-09-11 15:50:20 by ufranke ]
BSP Rev 2.0/2beta2
 R1: error message for not installed disk /ahci0a
     missing initialization for often installed /ahci0b
 M1: removed /ahci0a
     added   /ahci0b
 R2: sysRtcXxx not reentrant
 M2: lock critical section by a semaphore
 R3: bootstrapper does not support AHCI
 M3: AHCI support for bootstrapper added

-----[ Rev_2.0_2beta ]-----
[ 2009-07-31 10:07:25 by ufranke ]
Initial Revision

Main Software

Article No.	Description	More
10F019P60	VxWorks® 6.7 BSP (MEN) for F19P	Download Details