Memory
2x 32 KB data and instruction cache integrated in MPC5121e/MPC5123
Up to 512 MB SDRAM system memory
•
Soldered
•
DDR2
•
200 MHz memory bus frequency
Up to 64 MB boot Flash
128 KB non-volatile FRAM
Serial EEPROM 2 kbits for factory settings
Please see Standard Configurations for options and available standard versions.
Serial ATA (SATA)
Prepared for future use, not implemented yet!
One port via ESMini™ connector J1
Transfer rates up to 150 MB/s (1.5 Gbit/s)
SDHC
Secure digital host controller for MMC/SD/SDIO cards
One port via ESMini™ connector J2
Graphics
MBX Lite 2D/3D graphics engine
•
Dedicated coprocessor
•
High-performance graphics controller
•
Integrated into MPC5121e; MPC5123: no 3D acceleration
Display interface for TFT LCD displays
•
Integrated into MPC5121e/MPC5123
•
Maximum resolution: 1280 x 720 pixels
•
60 Hz maximum refresh rate
•
24 bits pixel color depth
•
Available via ESMini™ connector J2
•
24-bit RGB interface
•
Signals shared with programmable serial controller (PSC), configurable by software
•
Either display interface or PSCs can be used
Audio
AC'97 audio
Via ESMini™ connector J1
External Codec
USB
Six USB 2.0 host ports
•
One port also usable as a client port, configurable by software
EHCI implementation
Data rates up to 480 Mbit/s
Via ESMini™ connector J1
Ethernet
One 10/100Base-T Ethernet channel
Two LED signals for LAN link and activity status
Available via ESMini™ connector J1
External PHY
UART
Two interfaces
RS232 or RS422/RS485
Data rates up to 115,200 bit/s
Handshake lines: RTS, CTS
Available via ESMini™ connector J1
External transceivers
CAN Bus
Four CAN bus channels
2.0 A/B CAN protocol
Data rates up to 1 Mbit/s
Available via ESMini™ connectors: 2 ports on J1, 2 ports on J2
Programmable Serial Controller (PSC)
Six flexible serial interfaces
For individual configuration as SPI or UART (RS232, RS422 and RS485)
Available via ESMini™ connector J2
•
Signals shared with display interface, configurable by software
•
Either PSCs or display interface can be used
GPIO
Four lines on ESMini™ connector J1
Four lines on ESMini™ connector J2
I2C Bus
Three interfaces
Available via ESMini™ connector J1
Miscellaneous
Real-time clock (with GoldCap or battery backup on the carrier board)
Temperature sensor, power supervision and watchdog
Electrical Specifications
Supply voltage/power consumption:
•
+5 V (-3%/+5%), approx. 550 mA
Mechanical Specifications
Dimensions: 95 mm x 55 mm
ESMini™ PCB can be mounted between a frame and a cover for conduction cooling
Weight: 32 g (w/o cover and frame)
Environmental Specifications
Temperature range (operation): -40..+85°C (screened)
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +3,000 m
Shock: 15 g, 11 ms (EN 60068-2-27)
Bump: 10 g, 16 ms (EN 60068-2-29)
Vibration (sinusoidal): 1 g, 10 Hz - 150 Hz (EN 60068-2-6)
Conformal coating on request
MTBF
1,439,384 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
EMC behavior depends on the system and housing surrounding the ESMini™ module. MEN has performed general, successful EMC tests for ESMini™ using the XC4 evaluation carrier according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD), IEC 61000-4-3 (electromagnetic field immunity), IEC 61000-4-4 (burst), IEC 61000-4-5 (surge) and IEC 61000-4-6 (conducted disturbances)
BIOS
U-Boot Universal Boot Loader
Software Support
Linux
VxWorks®
For more information on supported operating system versions and drivers see Downloads.
