Rugged Computer Boards and Systems for
Harsh, Mobile and Mission-Critical Environments

Home > Products > Computer-On-Modules (COM) > PCI-104 > PP1

CompactPCI/Serial/PlusIO

VMEbus

Computer-On-Modules (COM)

Networks & Connectivity

Collect your favorite products in My MEN!

PP1 - PCI-104 COM Module with MPC5200/B

Overview
Technical Data
Ordering Information
Downloads

Log in to add PP1 to My MEN or to view your favorites

Photo

Diagram

Main Features

PowerPC® MPC5200/B / 384 MHz
32-bit/33-MHz PCI
Up to 128 MB SDRAM
Up to 16 MB Flash
Up to 64 KB FRAM
1 Fast Ethernet, dual UART
Dual CAN with CANopen support
MENMON™ BIOS for PowerPC® cards
-40 to +85°C with qualified components

Description Open

The PP1 is controlled by an MPC5200/B PowerPC® that operates at 384 MHz. The complete PCI-104 module is exclusively available for -40 to +85°C operating temperature, as is the MPC5200 itself. The CPU consumes less than 1 W at 384 MHz.

(continued)

Technical Data Open

CPU

PowerPC®
• MPC5200 or MPC5200B
• 384MHz

(continued)

Memory

Up to 128MB SDRAM system memory
• Soldered
• 64MHz memory bus frequency

16MB Flash

64KB non-volatile FRAM

Serial EEPROM 16kbits for factory settings

I/O

Ethernet
• 10/100Base-T Ethernet
• 9-pin D-Sub connector at front panel

Two RS232 UARTs (COM1/COM2)
• One 9-pin D-Sub connector at front panel
• Data rates up to 115.2kbit/s
• 512-byte transmit/receive buffer
• Handshake lines: none

USB
• One USB 1.1 port
• Physical line interface via SA-Adapter™ on I/O connector P2
• OHCI implementation
• Data rates up to 12Mbit/s

Two independent CAN interfaces
• Physical line interface via SA-Adapters™ on I/O connector P2

Display interface
• Four characters, 5 by 7 pixels
• For additional display adapter PCB (on request)

8 GPIO lines
• Accessible via I/O connector P2

Front Connections

One Ethernet (D-Sub)

Two RS232 UARTs COM1/COM2 (D-Sub)

PCI Interface

32-bit/33-MHz PCI interface at PCI-104 connector J1

V(I/O): +3.3V (not +5V tolerant)

Compliant with PCI Specification 2.2

Support of one external master

Miscellaneous

Real-time clock

Temperature sensor

Three push buttons and LED on optional display PCB (on request)

Electrical Specifications

Supply voltage/power consumption:
• +5V, ±5%, 100mA typ.
• +3.3V, ±5%, 900mA typ.

MTBF: 450,000h @ 40°C (derived from MIL-HDBK-217F)

Mechanical Specifications

Dimensions: conforming to PCI-104 specification

Weight: 90g

Environmental Specifications

Temperature range (operation):
• -40..+85°C
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

BIOS

MENMON™

Software Support

VxWorks®

Linux

MSCAN/Layer2 support: MEN Driver Interface System (MDIS™ for all supported operating systems)

For more information on supported operating system versions and drivers see Downloads.

Options

CPU

MPC5200 or MPC5200B, 384 MHz

(continued)

Standard Configurations

Article No.	CPU Type	Clock	System RAM	Flash	FRAM	Operation Temperature
15PP01-00	MPC5200	384 MHz	32 MB	16 MB	64 KB	-40..+85°C
15PP01-05	MPC5200	384 MHz	128 MB	16 MB	64 KB	-40..+85°C
15PP01-07	MPC5200B	384 MHz	128 MB	16 MB	64 KB	-40..+85°C

Standard PP1 Models

Article No.	Description	More
15PP01-07	MPC5200 Rev. B / 384MHz, 128MB SDRAM, 16MB Flash, 64KB FRAM, -40..+85°C with qualified components	Photo

Miscellaneous Accessories

Article No.	Description	More
0501-0002	Ethernet adapter D-Sub to RJ45 receptacle (cable 10cm)	Photo
0501-0003	Y-adapter RS232 D-Sub connector to dual D-Sub connector (cable 10cm)	Photo
08EK04-00	PCI-104 evaluation kit: Mini ATX carrier board, PP1 with PowerPC® MPC5200/384MHz, 128MB DRAM, 16MB Flash, 64KB FRAM, 1 Fast Ethernet, 2 COMs, 0..+60°C; incl. external PSU, SA-Adapter™ kit for 2 CAN and 1 USB 1.1	More info Photo

Software

Documentation Open

Article No.	Description	More
Linux
This product is designed to work under Linux. See below for potentially available separate software packages from MEN.
10EM01-90	Linux BSP (MEN) for EM1, EM1A, EM1N, EK6, EK6N, F12, F12N and PP1 under ELinOS 5.0 (rpm for direct installation in ELinOS)	Download Details
This product is designed to work under ELinOS Embedded Linux by Sysgo. For more information and product support please contact www.sysgo.com.
13Z015-06	MDIS5™ low-level driver sources (MEN) for 16Z029_CAN (MSCAN/Layer2) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
VxWorks
This product is designed to work under VxWorks®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
10PP01-60	VxWorks® 5.4..5.5 BSP (MEN) for PP1	Download Details
10PP01-61	VxWorks® 6.1 BSP (MEN) for PP1	Download Details
13Z015-06	MDIS5™ low-level driver sources (MEN) for 16Z029_CAN (MSCAN/Layer2) Requires an MDIS4™/2004 or MDIS5™ system package	Download Details
Firmware/BIOS
MENMON™ is MEN's firmware/BIOS for PowerPC® platforms.
14PP01-00	MENMON™ (Firmware) for PP1 (binary code)	Download Details
MEN's CANopen firmware consists of the Vector Informatik protocol stack. The corresponding driver software comes from MEN. It is based on MDIS™ (MEN Driver Interface System), which makes the hardware ready for use under Windows®, Linux, VxWorks®, QNX®, OS-9® and other software environments. You can find more information on the Vector CANopen tools at www.vector-informatik.de.

Article No.	Description	More
15PP01-DS	PP1 Data Sheet (PDF)	Download
Compare Chart PCI-104 modules		Download
20PP01-ER	PP1 Errata (PDF)	Download
20PP01-00	PP1 User Manual (PDF)	Download
21MENM-00	MENMON™ User Manual (PDF)	Download