P598 - Conduction-Cooled USM™ Main PMC

Technical Data

Functionality

User-defined through FPGA

Line drivers and/or additional hardware implemented on USM™ Universal Submodule (not included)

Memory

32MB SDRAM memory
• Soldered
• DDR2
• 132MHz memory bus frequency
• FPGA-controlled

2MB non-volatile Flash
• For FPGA data and Nios® firmware
• FPGA-controlled

FPGA

Standard factory FPGA configuration:
• Main bus interface
• Altera® SOPC Unit incl. Nios® II/f soft processor, GPIO, UART and DDR2 SDRAM control
• Wishbone-to-Avalon®/Avalon®-to-Wishbone bridges
• Chameleon Table V2
• Interrupt controller, SMBus controller
• PCI to Wishbone bridge, ID EEPROM emulation
• 16Z045_FLASH - Flash interface
• 16Z034_GPIO - GPIO controllers (2 IP cores, for onboard LEDs and 8-bit I/O)

The FPGA offers the possibility to add customized I/O functionality. See FPGA.

USM™ Slot

One slot for a standard USM™ module

For implementation of line drivers and/or additional hardware

Miscellaneous

Eight onboard LEDs, FPGA-controlled

I²C interface to detect the USM™ module

PMC Characteristics (PCI)

Compliant with PCI Specification 2.2

32-bit/33-MHz, 3.3V V(I/O)

Target

Peripheral Connections

Via Pn4 rear I/O connector

Electrical Specifications

Isolation voltage:
• Voltage depends on implementation and signal routing of USM™

Supply voltage/power consumption:
• +5V (-3%/+5%), FPGA idle / US0 plugged: approx. 118mA, memory test / US0 plugged: 122mA
• +3.3V (-5%/+5%), FPGA idle / US0 plugged: 76mA, memory test / US0 plugged: 82mA

MTBF: 848,597h @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: conforming to IEEE 1386.1

In accordance with VITA 20 (proposed Draft Standard for Conduction Cooled PMC)

Weight: 36g (w/o USM™ module)

Environmental Specifications

Temperature range (operation):
• -40..+85°C (qualified components), conduction-cooled
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Radio disturbance: no connection outside housing, therefore radio disturbance not relevant

ESD/burst: no external interface connector, therefore ESD and burst not relevant

Software Support

Flash update tools for Windows®, Linux, VxWorks®

Driver software depending on implemented FPGA functions

For more information on supported operating system versions and drivers see Software.