P699 - USM™ Main XMC

Technical Data

Functionality

User-defined through FPGA

Line drivers and/or additional hardware implemented on USM™ Universal Submodule (not included)

Memory

32MB SDRAM memory
• Soldered
• DDR2
• 133MHz memory bus frequency
• FPGA-controlled

4MB non-volatile Flash
• For FPGA configuration data
• FPGA-controlled
• Serial SPI Flash, 33MHz

FPGA

Standard factory FPGA configuration:
• Chameleon Table V2
• PCI Express® interface/PCIe® to Wishbone bridge
• ID EEPROM emulation
• 16Z069_RST - Reset controller
• 16Z052_GIRQ - Interrupt controller
• 16Z001_SMB - SMBus controller
• 16Z126_SERFLASH - Serial Flash interface
• 16Z043_SDRAM - DDR2 SDRAM controller
• 16Z125_UART - UART controller
• 16Z034_GPIO - GPIO controllers (3 IP cores, for onboard LEDs and 16-bit I/O)

The FPGA offers the possibility to add customized I/O functionality. See FPGA.

USM™ Slot

One slot for a standard USM™ module

For implementation of line drivers and/or additional hardware

Miscellaneous

Eight front-panel LEDs, FPGA-controlled

I²C interface to detect the USM™ module

XMC Characteristics

Compliant with XMC standard VITA 42.3-200x

PCI Express® links: one x1

PCI Express®

One x1 link

Data rate 250MB/s in each direction (2.5 Gbits/s per lane)

Peripheral Connections

Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector

Electrical Specifications

Isolation voltage:
• Voltage depends on implementation and signal routing of USM™

Supply voltage/power consumption:
• +5V and +12V (-5%/+5%)
• +3.3V (-5%/+5%)
• Consumption depends on FPGA and USM™ configuration

Mechanical Specifications

Dimensions: conforming to IEEE 1386.1

Weight: 70g (w/o USM™ module)

Environmental Specifications

Temperature range (operation):
• -10..+70°C (screened)
• Airflow: min. 10m³/h

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 2g/10..150Hz

Conformal coating on request

MTBF

757,662h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

Flash update tools for Windows®, Linux, VxWorks®

Driver software depending on implemented FPGA functions

UART driver software for Windows® on request

For more information on supported operating system versions and drivers see Software.