P506 - Quad CAN Bus Interface PMC

Technical Data

CAN Interface

Compliant to ISO 11898-1 and ISO 11898-2

Four channels

CAN Protocol Version 2.0A/B
• Standard and extended data frames
• 0..8 bytes data length
• Programmable data rate up to 1 Mbit/s

Support for remote frames

5 receive buffers (FIFO-scheme)

3 transmit buffers with prioritization

Maskable identifier filter

Programmable loop-back mode for self-test operation

Signaling and interrupt capabilities for receiver and transmitter error states

Memory

32MB SDRAM memory
• Soldered
• DDR2
• 132MHz memory bus frequency
• FPGA-controlled

2MB non-volatile Flash
• For FPGA data and Nios® firmware
• FPGA-controlled

FPGA

Standard factory FPGA configuration:
• Main bus interface
• Interrupt controller, SMBus controller
• 16Z029_CAN - CAN Controller
• 16Z043_SDRAM - SDRAM controller
• 16Z045_FLASH - Flash interface
• 16Z034_GPIO - GPIO controller
• 16Z034_PWM - PWM Pulse Width Modulation

The FPGA offers the possibility to add customized I/O functionality. See FPGA.

PMC Characteristics (PCI)

Compliant with PCI Specification 2.2

32-bit/33-MHz, 3.3V V(I/O)

Target

Peripheral Connections

Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector

Electrical Specifications

Isolation voltage:
• 1500 VAC

Supply voltage/power consumption:
• +5V (-3%/+5%), 240mA
• +3.3V (-5%/+5%), 15mA

Mechanical Specifications

Dimensions: conforming to IEEE 1386.1

Weight: 78g

Environmental Specifications

Temperature range (operation):
• -40..+85°C (qualified components)
• Airflow: min. 1.0m/s

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300m to + 3,000m

Shock: 15g/11ms

Bump: 10g/16ms

Vibration (sinusoidal): 1g/10..150Hz

Conformal coating on request

MTBF

tbd @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)

Software Support

Windows® (in preparation)

Linux (in preparation)

For more information on supported operating system versions and drivers see Software.