RS4 - IP67 Industrial Ethernet Switch

Eight 10/100Base-T ports at front panel (Electrical isolation: 1500 Vrms)

Port configuration: copper, 10/100 Mbit/s

Auto-negotiation / Auto MDI/MDIX crossover on all ports

Layer2-based Policy Control List

8K MAC address lookup table with automatic learning and aging

Up to 4096 VLANs

Supported Protocols and Standards

Ethernet flow control (IEEE 802.3x)

Link aggregation LACP / EtherChannel (IEEE 802.3ad, 2005)

Priority-based switching, Quality of Service/DiffServ, tagged frames, Layer2-based 801.1Q VLAN-ID packet routing (IEEE 802.1p)

Port-based authentication on registered MAC Address Lists

TCP/IP v4 and v6

VLAN/port-based VLANs GVRP/MVRP (IEEE 802.1Q Rev D5.0, 2005)

Service Interface

M12 connector at front

SPI interface for external SPI programmer

Front I/O

Eight Ethernet ports via M12 connectors

One service interface via M12 connector

One power input via M12 connector

Link and activity Ethernet status LEDs (two per channel)

Status LEDs for power and reset

Electrical Specifications

Power input
• Nominal input voltage 24 VDC (9 to 36 V) according to EN50155

EN50155 power interruption class S2

Isolation (according to EN50155)
• 1500 Vrms

Power consumption: 5 W

Mechanical Specifications

Dimensions: 220 mm x 130 mm x 70 mm (without connectors)

Prepared for wall or DIN-rail mounting with special mounting plates (available separately)

Weight: 1.9 kg

Environmental Specifications

Temperature range (operation):
• -40..+70°C (+85°C) with up to 85°C for 10 minutes according to class Tx (EN50155)
• Airflow: natural convection

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300 m to + 3000 m

Shock: 50 m/s², 30 ms (EN 61373)

Vibration (function): 1 m/s², 5 Hz - 150 Hz (EN 61373)

Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz (EN 61373)

Conformal coating on request

Climatic tests according to EN68068

Fully EN 50155-compliant (Power Interruption Class 2, Temperature Class Tx)

IP67 compliant

MTBF

944 046 h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

Flammability
• PCBs manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to the following railway standards:
• EN50121 (radio disturbance)
• EN61000-4-2 (ESD)
• EN61000-4-4 (burst)
• EN61000-4-5 (surge)

Conforming to e1 requirements of the German Federal Motor Transport Authority

Tested according to the following automotive standards:
• CISPR25/CISPR16 (radiated emission)
• ISO7637-2 (conducted emission - power line)
• ISO7637-2 (conductive immunity - power line)
• ISO7637-3 (capacitive immunity - signal line)
• ISO11452-2, ISO11452-5 (radiation immunity)
• EN50121 (radio disturbance)

Electrical Specifications

Other nominal input voltages: 36, 48, 72, 96 or 110 VDC
• Wide input range (according to EN50155): 0.7 x nominal voltage < nominal voltage < 1.25 x nominal voltage

Article No.	Description	More
06RS04-00	Unmanaged, 8x 100BaseT, PSU 24/48V, -40..+70°C screened, EN50155 class Tx compliant, IP67	Photo

Article No.	Description	More
06RS03-00	Managed, 8x 100BaseT, PSU 24/48V, -40...+70°C screened, EN50155 class Tx compliant, IP67	More info Photo

Article No.	Description	More
05RS01-00	DIN-Rail mounting plate for MIPIOS® family, -40..+85°C	Photo
05RS01-01	Wall-mounting plate for MIPIOS® family, -40..+85°C	Photo
05RS01-03	Cable set for MIPIOS® RSx and 19" rack-mountable SFx switches, consisting of: 4 Ethernet cables (M12 to RJ45), 1 service adapter (M12 to D-sub), 1 service cable, 1 dongle adapter (D-Sub to M12), 1 power cable (M12 to open end), -40..+85°C	Photo

Article No.	Description	More
06RS04-DS	RS4 Data Sheet (PDF)	Download
Compare Chart rugged MIPIOS® products		Download
Compare Chart Ethernet switches for different platforms		Download
20RS04-00	RS4 User Manual (PDF)	Download