A21B - 6U VMEbus QorIQ™ P1013/P1022 CPU (M-Modules™)New!

Memory

32 KB L1 instruction cache and 32 KB L1 data cache per processor core

256 KB L2 cache with ECC

Up to 2 GB SDRAM system memory
• Soldered
• DDR3 with ECC support
• 333 MHz memory bus clock frequency (667 MT/s, 5.33 GB/s data rate)

Up to 64 MB boot/program Flash

128 KB non-volatile FRAM

Serial EEPROM 4 kbits for factory settings

Mass Storage

microSD™ card slot
• Directly accessible on the board
• Connected to SDHC controller

mSATA disk slot
• Directly accessible on the board (via small adapter card)
• Connected via one SATA channel

I/O

Ethernet
• Two 10/100/1000Base-T Ethernet channels at the front
• RJ45 connectors at front panel
• Two front LEDs for each port to signal LAN link and activity status

One RS232 UART (COM1)
• RJ45 connector at front panel
• Data rates up to 230.4 kbit/s
• 16-byte transmit/receive buffer
• Handshake lines: CTS, RTS

Front Connections

Two Ethernet (RJ45)

One RS232 COM (RJ45)

M-Module™ front I/O if populated

Rear I/O

M-Module™ 0, 1 and 2

Mezzanine Extensions

Three M-Module™ slots
• Compliant with M-Module™ standard
• Characteristics: A08, A24, D16, D32, INTA, INTC, TRIGI, TRIGO

Miscellaneous

Real-time clock, buffered by a supercapacitor or battery (optional)
• Data retention of supercapacitor: typically up to one week

Watchdog

Voltage monitor and temperature sensor

Reset button and status LEDs at the front panel

VMEbus

Compliant with VME64 Specification

Slot-1 function with auto-detection

Master
• D08(EO):D16:D32:D64:A16:A24:A32:ADO:BLT:RMW

Slave
• D08(EO):D16:D32:D64:A16:A24:A32:BLT:RMW

1 MB shared fast SRAM

DMA

Mailbox functionality

Interrupter D08(O):I(7-1):ROAK

Interrupt handler D08(O):IH(7-1)

Single level 3 fair requester

Single level 3 arbiter

Bus timer

Location Monitor

Performance
• Coupled read/write D32 non-block transfer rate tbd. MB/s
• DMA read/write D32 BLT transfer rate tbd. MB/s
• DMA read/write D64 MBLT transfer rate tbd. MB/s

Electrical Specifications

Supply voltage/power consumption:
• +5 V (-3%/+5%), 1.3 A typ.
• +3.3 V (-3%/+5%), 1 A typ.
• ±12 V (-5%/+5%), only provided for mezzanines that need 12 V

Mechanical Specifications

Dimensions: standard double Eurocard, 233.3 mm x 160 mm

Weight (without mezzanines): 428 g

Environmental Specifications

Temperature range (operation):
• -40..+85°C (screened)
• Airflow: min. 1.0 m/s

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300 m to +3000 m

Shock: 50 m/s², 30 ms (EN 61373)

Vibration (function): 1 m/s², 5 Hz - 150 Hz (EN 61373)

Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz (EN 61373)

Conformal coating on request

MTBF

346 417 h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC Conformity

EN 55022 (radio disturbance)

IEC 61000-4-2 (ESD)

IEC 61000-4-3 (electromagnetic field immunity)

IEC 61000-4-4 (burst)

IEC 61000-4-5 (surge)

IEC 61000-4-6 (conducted disturbances)

BIOS

U-Boot Universal Boot Loader

Software Support

Linux (in preparation)

VxWorks®

OS-9® (on request)

QNX® (on request)

For more information on supported operating system versions and drivers see Downloads.

All processors available with 600 MHz, 800 MHz or 1.067 GHz

Memory

System RAM
• 1 GB or 2 GB

Boot/program Flash
• 32 MB or 64 MB

FRAM
• 0 KB or 128 KB

Mass Storage

Serial ATA (SATA)
• Onboard SATA connector for one additional port possible
• SATA Revision 2.x support
• Transfer rates up to 300 MB/s (3 Gbit/s)
• For connection of an in-system hard-disk drive

I/O

Various additional I/O possible using onboard mezzanine card
• Partly fixed set of interfaces, plus 16 pins for custom I/O
• One USB 2.0 port, EHCI implementation
• Additional UART COM interface
• Display interface
• Custom I/O functions can be implemented as FPGA IP cores (16 pins usable)
• Occupies the space of M-Module™ slot 3
• Please note that the mezzanine card is always completely customized, including front I/O, no standard cards are available.

Mezzanine Slots

2 PMC / XMC instead of M-Modules™ (A21C variety)

Miscellaneous

Back-up battery holder for real-time clock (RTC) (may be in mechanical conflict with M-Module™ slot 0)

Software Support

OS-9®

QNX®

Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information.

Article No.	Description	More
01A021B00	A21B, Freescale™ QorIQ™ single-core P1013, 800 MHz, 1 GB DDR3 ECC SDRAM, 32 MB Flash, 3 M-Module™ slots, -40 to +85°C screened	Photo

Article No.	Description	More
01A021C00	A21C, Freescale™ QorIQ™ single-core P1013, 800 MHz, 1 GB DDR3 ECC SDRAM, 32 MB Flash, 2 PMC/XMC slots, -40 to +85°C screened	More info Photo

Article No.	Description
0751-0046	MicroSD card, 2 GB, -40..+85°C
0751-0051	SSD mSATA, 8 GB, -40..+85°C
0751-0052	MicroSD card, 4 GB, -40..+85°C
0754-0007	SSD SATA 256 GB, 2.5" MLC, 0..+70°C

Article No.	Description	More
05F006-00	RS232 interface cable RJ45 to 9-pin D-Sub (1 COM to 1 COM), 2m	Photo
05M000-17	25 mounting screw sets to fix M-Modules™ on carrier boards	Photo

Article No.	Description	More
VxWorks
This product is designed to work under VxWorks®. For details regarding supported/unsupported board functions please refer to the corresponding software data sheets.
10A021-60	VxWorks® 6.9 BSP (MEN) for A21B and A21C, SMP	Download Details
Firmware/BIOS
This product uses the U-Boot bootloader available from DENX together with board-specific additions from MEN.
14A021-00	U-Boot Bootloader (DENX/MEN) for A21B and A21C	Download Details

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
01A021BDS	A21B Data Sheet (PDF)	Download
Compare Chart 6U VMEbus CPU and I/O cards		Download
20A021BER	A21B Errata (PDF)	Download
20A021-00	A21B/A21C User Manual (PDF)	Download