Intel Xeon D on CompactPCI Serial – 16 Cores for Computing and Virtualization
- Intel Xeon D-1500, up to 16 cores
- Up to 32 GB DDR4 DRAM, ECC
- Built-in hardware virtualization
- Board management controller
- MicroSD card slot
- Standard front: 2x 10 Gb Ethernet, 1x 1 Gb Ethernet, 1x USB 3.0, 1x RS232 (via USB)
- Standard rear: 28x PCIe, 2x USB 3.0, 6x SATA, 4x Ethernet
- Trusted Platform Module (TPM)
Gimme the data: 10 Gb Ethernet and PCIe 3.0
Based on the new Intel Xeon D processor, the G25A is MEN’s first CompactPCI Serial SBC which supports two times 10 Gb Ethernet on the front as well as PCIe 3.0 via the backplane. This enables a smooth handling of high data volumes.
The versions of G25A with 4, 8 and 16 cores provide concentrated computing performance and are at the same time the basis for virtualization applications. The required abstraction of software from hardware is achieved by the CPU’s built-in hardware virtualization support, the organization of the 32 GB DDR4 RAM and the scalability of the G25A standard models.
For security reasons a Trusted Platform Module (TPM) is available. Safety functions are implemented using ECC for the RAM storage, a board management controller and a watchdog for the operating system.
While the G25A is prepared for conformal coating and can be equipped with a heat sink as well as being embedded into a conductive cooling frame, all components are by default firmly soldered and guarantee shock and vibration resistance. Therefore, the G25A is suited for applications outside of a protected server room as in a train or an airplane or of course also for complex applications in industrial environments.
The minimum standard availability of 7 years guaranteed by Intel and the implementation on the state-of-the-art CompactPCI Serial standard provide future-safety for the customer’s projects.
MEN press documents are archived on this web site for historical purposes. Information in the documents is accurate at the time of release. However, product specifications and other specific information may change over time. Some information about product pricing and availability may be limited to specific geographic areas and may differ in other areas. Information as stated in the document may or may not be in effect after the date of the release.In addition, press documents may contain statements that are forward-looking. These statements are based on current expectations as of the date of a particular release. Actual results may differ materially from those projected because of a number of risks and uncertainties.