Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575
Mar 26, 2018

Embedded Single Board Computer with ARM Cortex A72

The G40A is a high-performance 3U CompactPCI Serial multicore CPU platform equipped with the NXP ARM Cortex A72 LS1046A processor.
Featuring ARM core technologies and NXP data processing accelerators and I/O interfaces, G40A secures your application for the future by being full-virtualization ready - memory and I/O sub-systems can be virtualized - and available for 15 years from product introduction.

Wide Range of I/O, Network Connectivity
The G40A provides modern serial interface technologies such as PCI Express generation 3.0 (up to 8 Gbit/s), USB 3.0, SATA generation 3 (up to 6 Gbit/s). It is network connection ready by providing front Ethernet interfaces and an Ethernet switch. Nevertheless, compatibility with legacy interfaces is ensured with communications interfaces such as UART, I2C, SPI, etc.

Board Supervision and Management
The G40A is monitored using an MEN proprietary board management controller (BMC) which controls parameters such as voltages, temperature and provides a user configurable watchdog, making it ready for applications where functional safety is required. It supports low-power mode to enable Wake-on-LAN when the board's power supply is off.

Extensive Memory
The memory configuration of the G40A includes a fast DDR4 DRAM with ECC soldered to the board to guarantee optimum shock and vibration resistance. A non-volatile SRAM, an eMMC NAND Flash device and a microSD card can also be assembled offering space for user applications or usable as a local boot medium.

Perfect for Harsh Environments
With small 3U dimensions, G40A is perfectly suited for use in harsh environments, making it an ideal solution where space is limited but high processing capabilities are needed, e.g. in data collection applications on board trains. The board can be ordered in a version which enables fanless operation.
The G40A comes with a tailored heat sink. All components are soldered for protection against shock and vibration according to applicable railway standards. The G40A is also coated so that it can be used in humid and dusty environments.

Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).