Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575

XM51 - ESMexpress COM with QorIQ P4080


This product has been discontinued.

The XM51 is a rugged Computer-On-Module (COM) of the ESMexpress family featuring a QorIQ P4080, P4040 or P3041 CPU. It is designed for avionics, industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The XM51 supports conductive cooling technology and is 100% EMC proof.

  • XM51 Product ImageXM51 top side without cover and frame
  • XM51 Product ImageXM51 back side (without covering frame)
  • XM51 Product ImageXM51 inside the covering frame
  • XM51 Product ImageXM51 inside the covering frame mounted on the carrier board XC1
  • XM51 Product Image
  • XM51 Product Image
  • XM51 Product Image
  • XM51 Product Image

Main Features

  • NXP QorIQ P4080, P4040 or P3041
  • Power Architecture e500mc CPU
  • Up to 8 cores, up to 1.5 GHz
  • Up to 16 GB ECC DDR3 SDRAM, 1 or 2 controllers
  • Up to 128 KB FRAM, up to 256 MB Flash
  • 2 Gb Ethernet, 4 USB 2.0, 1 USB client
  • 2 SATA (3 Gbit/s), 2 PCIe x1 (5 Gbit/s)
  • U-Boot Universal Boot Loader
  • -50°C to +85°C Tcase with qualified components
  • Conduction cooling
XM51 Product Image

Technical Data

NXP QorIQ P4080 or P4040 or P3041
  • 1.2 GHz up to 1.5 GHz
  • Eight/four high-performance Power Architecture e500mc cores
  • 32 KB instruction and data L1 cache and private 128 KB L2 cache per processor core
  • Up to 16 GB SDRAM system memory
    • Soldered
    • DDR3 with ECC support
    • Up to 667 MHz memory bus frequency, depending on processor configuration
    • P4080/P4040 with two independent memory controllers, P3041 with one controller
  • Up to 256 MB boot/program Flash
  • 128 KB non-volatile FRAM
  • Serial EEPROM 8 kbits for factory settings
Serial ATA (SATA)
  • Two ports via ESMexpress connector
  • SATA Revision 2.x support
  • Transfer rates up to 300 MB/s (3 Gbit/s)
  • Via PCIe-to-SATA bridge
  • Four USB 2.0 host ports via ESMexpress connector
    • OHCI and EHCI implementation
    • Data rates up to 480 Mbit/s
  • One USB client port via ESMexpress connector
    • Via UART-to-USB converter
    • Data rates up to 230.4 kbit/s
    • 16-byte transmit/receive buffer
    • Handshake lines: none
  • Two 10/100/1000Base-T Ethernet channels
  • Two LED signals per channel for LAN link and activity status and connection speed
  • Accessible via ESMexpress connector
PCI Express
  • Two x1 links via ESMexpress connector
  • PCIe 2.x support
  • Data rate 500 MB/s in each direction (5 Gbit/s per lane)
3 lines via ESMexpress connector
I2C Bus
1 interface via ESMexpress connector
  • Real-time clock (with supercapacitor or battery backup on the carrier board)
  • Temperature sensor, power supervision and watchdog
Electrical Specifications
Supply voltage/power consumption:
  • +12V (9..16 V), 32 W max.
Mechanical Specifications
  • Dimensions: 95 mm x 125 mm (conforming to ESMexpress specification)
  • ESMexpress PCB mounted between a frame and a cover
  • Weight: 230 g (incl. cover and frame)
Environmental Specifications
  • Temperature range (operation): -50..+85°C Tcase (ESMexpress cover/frame) (qualified components)
  • Temperature range (storage): -50..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to +3000 m
  • Shock: 15 g, 11 ms (EN 60068-2-27)
  • Bump: 10 g, 16 ms (EN 60068-2-29)
  • Vibration (sinusoidal): 1 g, 10 Hz - 150 Hz (EN 60068-2-6)
475 088 h @ 40°C according to IEC/TR 62380 (RDF 2000)
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
  • EMC behavior depends on the system and housing surrounding the ESMexpress module.
  • MEN has performed general, successful EMC tests for ESMexpress using the XC1 evaluation carrier according to:
    • EN 55022 (radio disturbance)
    • IEC 61000-4-2 (ESD)
    • IEC 61000-4-3 (electromagnetic field immunity)
    • IEC 61000-4-4 (burst)
    • IEC 61000-4-5 (surge)
    • IEC 61000-4-6 (conducted disturbances)
U-Boot Universal Boot Loader
Software Support
  • VxWorks
  • Linux (on request)
  • For more information on supported operating system versions and drivers see Software.


  • QorIQ P4080 or P4040 or P3041
    • P4080: eight cores, up to 16 GB DDR3 RAM (two controllers), 2 MB L3 cache, 30 W max. (processor)
    • P4040: four cores, up to 16 GB DDR3 RAM (two controllers), 2 MB L3 cache, 24 W max. (processor)
    • P3041: four cores, up to 8 GB DDR3 RAM (one controller), 1 MB L3 cache, 18.2 W max. (processor)
  • All processors available with 1.2 GHz, 1.33 GHz or 1.5 GHz
  • System RAM
    • One or two memory banks, depending on processor type
    • 2 GB, 4 GB, 8 GB
    • 16 GB (only possible with two banks, P4080 or P4040)
    • Currently only 2 GB are supported by U-Boot and BSP
  • Boot/program Flash
    • 64 MB, 128 MB or 256 MB
  • FRAM
    • 0 KB or 128 KB
Software Support
Linux; processors are supported, U-Boot support already implemented
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.



VxWorks BSP (MEN) for XM51

This product uses the U-Boot bootloader available from DENX together with board-specific additions from MEN.

U-Boot Bootloader (DENX/MEN) for XM51


A Windows USB2UART driver from FTDI is available for XM50, XM51 and F50P/F50C Windows hosts.
More info & downloads

Application Examples

Flight Display Computer

A rugged Computer-On-Module is the heart of all kinds of airborne video and control displays that are necessary for the information of the pilot.

Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).