Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575
sales@menmicro.com

P511 - Dual Fast Ethernet PMC

PCI Mezzanine Card

The P511 is a dual Ethernet USM-based mezzanine PMC supporting an FPGA MAC layer and six additional GPIOS.

  • P511 Product ImageP511 Dual Fast Ethernet PMC
  • P511 Product Image

Main Features

  • 2 full-duplex or half-duplex channels
  • 10Base-T and 100Base-TX physical layer
  • MAC layer realized in FPGA
  • Local or external data buffer
  • 6 additional GPIOs
  • Fully integrated to comply with IEEE802.3
  • 500 VAC isolation voltage
  • -40 to +85°C with qualified components
  • 32-bit/33-MHz PMC
  • PMC based on USM concept
  • Individual FPGA configuration
P511 Product Image

Technical Data

Ethernet Interface
  • Two 10/100Base-T Ethernet channels
  • Accessible on two RJ45 connectors via adapter cable
  • Half duplex/full duplex support
Memory
  • 32MB SDRAM memory
    • Soldered
    • DDR2
    • 132MHz memory bus frequency
    • FPGA-controlled
  • 2MB non-volatile Flash
    • For FPGA data and Nios firmware
    • FPGA-controlled
GPIO
Up to six lines controlled via software
FPGA
  • Standard factory FPGA configuration:
    • Main bus interface
    • Interrupt controller, SMBus controller
    • 16Z087_ETH - Ethernet MAC IP core (2 IP cores for the 2 channels)
    • 16Z043_SDRAM - SDRAM controller
    • 16Z045_FLASH - Flash interface
    • 16Z034_GPIO - GPIO controllers (2 IP cores, for onboard LEDs and 8-bit I/O)
  • The FPGA offers the possibility to add customized I/O functionality. See FPGA.
PMC Characteristics (PCI)
  • Compliant with PCI Specification 2.2
  • 32-bit/33-MHz, 3.3V V(I/O)
  • Target and initiator
Peripheral Connections
  • Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector
  • Adapter cable to two RJ45 connectors included in the delivery
Electrical Specifications
  • Isolation voltage:
    • 500 VAC
  • Supply voltage/power consumption:
    • +5V (-3%/+5%), 40mA
    • +3.3V (-5%/+5%), 139mA
Mechanical Specifications
  • Dimensions: conforming to IEEE 1386.1
  • Weight: 78g
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C (qualified components)
    • Airflow: min. 1.0m/s
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 3,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 1g/10..150Hz
  • Conformal coating on request
MTBF
1 305 649 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Conforming to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)
Software Support
  • Windows
  • Linux
  • QNX
  • For more information on supported operating system versions and drivers see Software.

FPGA

Options

CPU
Nios soft core implementation possible (e.g. for real-time Ethernet)
Rear I/O
Via Pn4 rear I/O connector
Cooling
Conduction Cooling
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.

Ordering Information

Software

Linux
13MD05-90

MDIS5 System (and Device Driver) Package (MEN) for Linux. This software package includes most standard device drivers available from MEN.

13Z077-90

Linux native driver (MEN) for 16Z077_ETH and 16Z087_ETH

Windows
10Y000-78

Windows Embedded Standard 7 BSP for F19P, F21P, F22P, F23P, G20, G22, G23, CB70C, CB70, XM2, MM2, BC50M, BC50I, BL50W, BL50S, BC70M, BL70S, BL70W, BL70E, DC2, DC15, DC17, F205, F206, F210, F215, F216, G215, P506, P507 and P511

13P511-77

Windows Installset (MEN) for P511

13Z087-70

Windows native driver (MEN) for 16Z087_ETH (Ethernet controller)

QNX
13Z087-40

QNX native driver (MEN) for 16Z087_ETH

Application Examples

Advanced Train Management System

The safety-critical computer system is based on a CompactPCI - CompactPCI Serial hybrid configuration and is certifiable up to SIL 4.


Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).