Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575
sales@menmicro.com

SA22 - IBIS Slave/Master Interface Adapter

SA-Adapter

The SA22 is an IBIS interface adapter with one IBIS slave interface or one IBIS master interface.

Download data sheet

  • SA22 Product ImageConfiguration example 08SA22-01
  • SA22 Product ImageConfiguration example 08SA22-01
  • SA22 Product Image
  • SA22 Product Image

Main Features

  • 1 channel master or slave
  • Optical isolation
  • -40 to +85°C screened
SA22 Product Image

Technical Data

Interfaces
  • IBIS master or slave on front connector
    • External 24V power supply on front connector for IBIS signal level (only for master)
    • Standard IBIS data rate (1200 bit/s) up to standard UART data rate (up to 9600 bit/s)
  • Serial TTL Interface on 10-pin SA-Adapter connector
Installation
  • As a piggy-back board directly on a carrier board
  • Via ribbon cable
Peripheral Connections
Via front panel on a shielded 9-pin D-Sub receptacle connector
Electrical Specifications
  • Isolation voltage:
    • 1500V DC or 1000V AC between isolated side and digital side
  • Supply voltage/power consumption:
    • Digital side +5V (-3%/+5%), 20mA max.
    • Isolated side +24V (-30%/+25%), 1.5A max (short circuit)
  • MTBF: 3,071,624 @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
  • Dimensions: 32mm x 42mm
  • Weight:
    • 16g (Slave)
    • 18g (Master)
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C(screened)
    • Airflow: min. 10m³/h
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 3,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 2g/10..150Hz
  • Conformal coating on request
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 50121-3-2 (table 5), EN 55011 (radio disturbance), EN 61000-4-2 (ESD), EN 61000-4-4 (burst), EN61000-4-5 (surge)

Ordering Information

Standard SA22 Models
08SA22-04

IBIS slave interface, isolated, -40..+85°C screened, conformal coating

This product can be ordered until 2017-04-01
Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).