Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575

XC6 - ESMini COM Carrier Board for 3.5" PCs

Evaluation Platform

This product has been discontinued.

XC6 is an ESMini carrier that can be used together with any type of ESMini COM module.

Download data sheet

  • XC6 Product ImageXC6 ESMini COM Carrier Board for 3.5'' PCs
  • XC6 Product ImageXC6 ESMini COM Carrier Board - front connectors
  • XC6 Product Image
  • XC6 Product Image

Main Features

  • 1 ESMini computer-on-module slot
  • 2 Fast Ethernet, 4 USB 2.0, 1 UART
  • DVI-I, audio I/O, TTY
  • PCI Express Mini Card slot and SIM card holder
  • USB Flash disk slot
  • microSD card holder
  • SATA for external hard disk on board
  • -40°C to +85°C screened
XC6 Product Image

Technical Data

ESMini Carrier Card
  • One ESMini slot
  • J1 and J2 assembled
  • One SATA connector
  • One USB Flash disk slot
    • Via one USB onboard connector
  • One microSD card slot
One DVI-I connector
  • Analog VGA signals via LVDS interface
  • Four USB 2.0 host connectors, one optionally usable as client
  • 10/100Base-T Ethernet
    • Two interfaces on RJ45 connectors
  • Audio
    • Audio in
    • Audio out
    • Via 3.5 mm jack
  • RS232/RS422/RS485
    • One interface via 9-pin D-Sub connector
    • Configurable via software
  • TTY
    • Max. transfer rate 4800 bit/sec
    • Active or passive
    • Electrically isolated
  • GPIO
    • 8 lines on a 10-pin connector (5 V level, for connection of an SA-Adapter)
    • 16 lines on an 18-pin connector (3.3 V level)
One PCI Express Mini Card slot
  • With SIM card slot
  • Via one PCI Express x1 links and one USB port
  • Goldcap
  • Battery holder
  • Power button signal on pin header
  • Reset in/out on pin header
Electrical Specifications
  • Supply voltage/power consumption:
    • ATX standard power supply via 4-pin connector
    • +5 V, 2.1 A max.
    • +12 V (12 V only for LVDS backlight), (depends on the display) 0.7 A with SHARP LQ121S1LG61 (12.1" / 800x600) with full brightness
    • Power supply cable should have a cross section of at least 1.5 mm²
  • MTBF: 683,499 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
  • Dimensions: 146x102 mm
  • Weight: 142 g (without ESMini module)
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C
    • Airflow depending on ESMini module
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to +2,000 m
  • Bump: 10 g/16 ms
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers


  • One LVDS ZIF connector
    • For direct connection of an LVDS display
    • Instead of VGA signals on the DVI-I connector
  • One LVDS backlight 10-pin connector
  • One USB client port instead of one of the host ports
  • Connection of SA-Adapter on 10-pin GPIO connector (e.g. with IBIS or CAN bus functionality)
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.

Ordering Information

PCI Express Mini Cards
PX6 - Security Smart Card Reader

PX6, Security Smart Card Reader, 2FF Card holder, PCI Express Mini Card connector pass through, -40..+85°C

PX5 - USB HID to Stereo Audio Interface

USB HID to analog audio PCI Express Mini Card, 1 stereo input and 1 stereo output, conformal coated

PX4 - Mobile Phone Voice Interface

PCI Express Mini Card, mobile wireless functions, audio interface, Mini-SIM card holder, -40°C to +85°C

PX1N - GLONASS & GPS Interface

GLONASS & GPS PCI Express Mini Card, Dead Reckoning, +5 V phantom power supply, -40 °C to +85 °C

PX1N - GLONASS & GPS Interface

GLONASS & GPS PCI Express Mini Card, Dead Reckoning, -40 °C to +85 °C

PX7 - PCIe Mini Card to M.2 Adapter

PCI Express Mini Card for converting PCI Express Mini to M.2 and PCI Express x1 to USB3.0, USB 3.0 extension for Box PCs, -40 to +85, conformal coated



Data Sheets
User Manuals
Errata & Technical Information
Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).