Log in News & Media | Downloads | Corporate | Careers | Legal Notes
(215) 542-9575
sales@menmicro.com

F19P - Intel Core 2 Duo CPU Board

3U CompactPCI PlusIO

The F19P versatile 4HP/3U single-board computer is compatible to the CompactPCI PlusIO standard and equipped with the Intel Core 2 Duo processor SP9300.

  • F19P Product ImageF19P Intel Core 2 Duo CPU Board
  • F19P Product Image

Main Features

  • Intel Core 2 Duo SP9300, 2.26 GHz
  • Dual-core 64-bit processor
  • 32-bit 4HP system master (or stand-alone)
  • For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0)
  • Up to 4 GB DDR3 DRAM soldered
  • CompactFlash and microSD card slots
  • Front I/O: VGA, 2 Gb Ethernet, 2 USB
  • Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gb Ethernet
  • Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc.
  • Board controller
  • -40 to +85C screened version
F19P Product Image

Technical Data

CPU
  • Intel Core 2 Duo SP9300
    • Up to 2.26 GHz processor core frequency
    • 1066 MHz system bus frequency
  • Chipset
    • Northbridge: Intel GS45
    • Southbridge: Intel ICH9M-SFF
Memory
  • Up to 6 MB L2 cache integrated in Core 2 Duo
  • Up to 4 GB DDR3 SDRAM system memory
    • Soldered
    • 800/1067 MHz memory bus frequency locked to the FSB frequency
  • 16 Mbits boot Flash
  • Serial EEPROM 2kbits for factory settings
  • CompactFlash card interface
    • Via USB
    • Type I
    • True IDE
    • DMA support
  • MicroSD card interface
    • Via USB
Mass Storage
  • CompactFlash
    • Connected via USB
  • MicroSD card
    • Connected via USB
  • Serial ATA (SATA)
    • Four channels via rear I/O, one channel via side-card connector (switchable)
    • Transfer rates up to 3 Gbit/s
    • RAID level 0/1 support
Graphics
  • Integrated in GS45 chipset
    • Up to 533 MHz graphics core
    • Maximum resolution: 2048 x 1536 pixels
  • VGA connector at front panel
  • Two SDVO ports available via side-card connector
    • Two additional DVI connectors at front panel optional via side card
    • Simultaneous connection of two monitors
I/O
  • USB
    • Two USB 2.0 ports via Series A connectors at front panel
    • Four USB 2.0 ports via side-card connector
    • Four USB 2.0 ports via rear I/O
    • One USB for connection of CompactFlash/MicroSD or USB NAND Flash
    • UHCI implementation
    • Data rates up to 480Mbit/s
  • Ethernet
    • Two 10/100/1000Base-T Ethernet channels at the front
    • RJ45 connectors at front panel
    • Ethernet controllers are connected by two x1 PCIe links from ICH9M
    • Onboard LEDs to signal activity status and connection speed
    • One 10/100/1000Base-T Ethernet channel via rear I/O
    • Ethernet controller is connected by one x1 PCIe link from GS45
  • High Definition (HD) audio
    • Accessible via side-card connector
Front Connections (Standard)
  • VGA
  • Two USB 2.0 (Series A)
  • Two Ethernet (RJ45)
Rear I/O
  • Four SATA
  • Four USB
  • One Gigabit Ethernet
  • Four PCI Express x1 links
  • Compatible with PICMG 2.30 CompactPCI PlusIO
    • 1PCI33/4PCIE2.5/4SATA3/4USB2/1ETH1G
Miscellaneous
  • Board controller
  • Real-time clock, buffered by a GoldCap or alternatively a battery (5 years life cycle)
  • Watchdog timer
  • Temperature measurement
  • One user LED
  • Reset button
PCI Express
  • Three x1 links to connect local 1000Base-T Ethernet controllers
    • Data rate 250 MB/s in each direction (2.5 Gbit/s per lane)
  • Four x1 links for extension through side-card connector or rear I/O
    • Data rate up to 1 GB/s in each direction (2.5 Gbit/s per lane)
CompactPCI Bus
  • Compliance with CompactPCI Core Specification PICMG 2.0 R3.0
  • System slot
  • 32-bit/33-MHz CompactPCI bus
  • V(I/O): +3.3 V (+5 V tolerant)
Busless Operation
  • Board can be supplied with +5 V only, all other voltages are generated on the board
  • Backplane connectors used only for power supply
Electrical Specifications
  • Supply voltage/power consumption with Celeron M722 processor:
    • +5 V (-3%/+5%), 2.2 A typ., 2.7 A max.
    • +3.3 V (-3%/+5%), 1.4 A (2 Gb Ethernet), 1 A (1 Gb Ethernet)
    • +12 V (-10%/+10%), approx. 10 mA
    • If the board is supplied with 5 V only (typically without a bus connection), the 3.3 V are generated on the board and fed to the backplane (3 A max.)
  • Supply voltage/power consumption with SP9300 processor:
    • +5 V (-3%/+5%), 4.9 A typ., 6.4 A max.
    • +3.3 V (-3%/+5%), 1.4 A (2 Gb Ethernet), 1 A (1 Gb Ethernet)
    • +12 V (-10%/+10%), approx. 10 mA
    • If the board is supplied with 5 V only (typically without a bus connection), the 3.3 V are generated on the board and fed to the backplane (3 A max.)
Mechanical Specifications
  • Dimensions: conforming to CompactPCI specification for 3U boards
  • Front panel: 4HP with ejector
  • Weight: 430 g
Environmental Specifications
  • Temperature range (operation):
    • Depends on system configuration (CPU, hard disk, heat sink...)
    • Maximum: +85°C
    • Minimum: -40°C (all processors)
    • Conditions: airflow 1.5 m/s, typical power dissipation: 9.8 W (F19P version with Celeron M722), 13.4 W (F19P version with SP9300 Core 2 Duo) with Windows XP operating system and 1 Gb Ethernet connection
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to +2,000 m
  • Shock: 50 m/s², 30 ms
  • Vibration (function): 1 m/s², 5 Hz - 150 Hz
  • Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz
  • Conformal coating on request
MTBF
552,030h @ 40°C according to IEC/TR 62380 (RDF2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC 61000-4-3 (electromagnetic field immunity), IEC 61000-4-4 (burst), IEC 61000-4-5 (surge) and IEC 61000-4-6 (conducted disturbances)
BIOS
InsydeH2O UEFI Framework
Software Support
  • Note that 64-bit hardware technology can be used in an optimal way with 64-bit operating system support
  • Windows (Windows XP, Windows 7)
  • Linux
    • tested/verified with: Ubuntu 10.04 (kernel 2.6.32-21) 32-bit and 64-bit versions
    • OpenSuse 11.3 32-bit and 64-bit versions
    • and: CentOS 5.5 (kernel 2.6.18) 32-bit and 64-bit versions
    • Detailed matrix of supported interfaces under Ubuntu 10.04 and OpenSuse 11.3
  • VxWorks
  • QNX
  • Intel Virtualization Technology, allows a platform to run multiple operating systems and applications in independent partitions; one computer system can function as multiple "virtual" systems
  • For more information on supported operating system versions and drivers see Software.

Options

CPU
  • Intel SP9300, 2.26 GHz, 1066 MHz FSB, 6 MB cache, 25 W
  • Intel SL9400, 1.86 GHz, 1066 MHz FSB, 6 MB cache, 17 W
  • Intel SU9300, 1.2 GHz, 800 MHz FSB, 3 MB cache, 10 W
  • Intel Celeron M722, 1.2 GHz, 800 MHz FSB, 1 MB cache, 5.5 W
  • Intel Celeron M723, 1.2 GHz, 800 MHz FSB, 1 MB cache, 10 W
Memory
  • System RAM
    • 2 GB or 4 GB
  • CompactFlash
    • 0 MB up to maximum available
  • MicroSD card
    • 0 MB up to maximum available
  • NAND Flash instead of CompactFlash, microSD card and battery
    • 0 MB up to maximum available
Graphics
One or two DVI-D connectors at front via side card
  • Simultaneous connection of two monitors
I/O
Ethernet
  • 9-pin D-Sub connector with one or two 10/100Base-T ports instead of two RJ45 connectors
  • Two M12 connectors with two 10/100/1000Base-T ports on 8HP instead of two RJ45 connectors
Mechanical
  • Side card can be added at left or right side of CPU
  • Adapter board for two M12 Ethernet connectors can be added at left or right side of CPU
Operation Temperature
  • Depends on system configuration (CPU, hard disk, heat sink...)
  • Maximum: +85°C
  • Minimum: -50°C
Cooling Concept
Also available with conduction cooling in MEN CCA frame
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.

Ordering Information

Standard F19P Models
02F019P00

Intel Celeron M 722, 1.2 GHz, 2 GB DDR3 DRAM, -40..+85°C screened

02F019P01

Intel Core 2 Duo SP9300, 2.26 GHz, 4 GB DDR3 DRAM, 0..+60°C

Miscellaneous Accessories
0713-0003

CompactPCI 3U 1-slot backplane for stand-alone operation of F14, F15, F17, F18, F19P, F21P, F22P, F23P: 32-bit/33-MHz with rear I/O, 3.3V supply, ATX-power, power, JTAG, IPMB and utility connection, 6x screw connection M3

Related Hardware
02F600-00
F600 - Side Card for SATA/Legacy I/O

2 COM extensions and SATA hard disk slot, for F14 and compatible SBCs, -40..+85°C screened

Details
02F601-00
F601 - Side Card for Multimedia

1 DVI-D and 1 audio at front, SATA hard disk slot, for F14 and compatible SBCs, 4HP, 0..+60°C

Details
02F601-02
F601 - Side Card for Multimedia

2 DVI-D, 1 audio, 1 COM (via SA-Adapter) at front, SATA hard disk slot, for F14 and compatible SBCs, 8HP, 0..+60°C

Details
02F603-00
F603 - Side Card USB/COM

3U CompactPCI side card with 2 USB and 1 COM extension, SATA hard disk and CompactFlash slot, for F14 and compatible SBCs, mounted to the right of the SBC, 0..+60°C

Details
02F605-00
F605 - Side Card XMC/PMC

1 XMC or PMC slot, for F14 and compatible SBCs, -40..+85°C with qualified components

Details
02F606-00
F606 - Side Card Gb Ethernet

2 Gigabit Ethernet on Lemo railway compliant connectors, 1 COM extension (SA-Adapter not included), SATA hard disk slot, for F14 and compatible SBCs, conformally coated, -40...+85°C screened

Details
08CT12-00
CT12 - Rear I/O Transition Module

CompactPCI PlusIO rear transition module 3U/80mm, 2 Ethernet, 4 USB, 4 SATA, 4 PCIe x1, -40°C..+85°C qualified

Details
Memory
0751-0045

CompactFlash card, 4 GB, Type I, fixed bit set, -40 to +85°C

0751-0052

MicroSD card, 4 GB, -40 to +85°C

0751-0055

CompactFlash card, 8 GB, Type I, fixed bit set, -40 to +85°C

0751-0060

CompactFlash card, 16 GB, -40 to +85°C

0751-0061

CompactFlash card, 2 GB, Type I, fixed bit set, -40 to +85°C

0751-0046

MicroSD card, 2 GB, -40..+85°C

Systems & Card Cages
0701-0046
0701-0046 - Tabletop/Wall-Mount Enclosure, 3 Slots, 3U Cards Vertical

CompactPCI 19" 4U/24HP desktop system for 3U cards, 3-slot 3U CompactPCI backplane, system slot right, 1U fan tray with 1 fan, 8 HP space for 1 pluggable PSU

Details
0701-0056
0701-0056 - CPCI to CPCI Serial Hybrid Rackmount Enclosure, 8 Slots, 3U Cards Vertical

CompactPCI 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 4+4-slot 3U CompactPCI / CompactPCI Serial hybrid backplane, prepared for rear I/O, 250W power supply wide range 90..264VAC on rear, 1U fan tray with 2 fans included, 0..+60°C

Details

MEN delivers turn-key systems completely installed (hardware, operating system, accessories), wired and tested. Different rack sizes, power supplies and backplanes on request.
For details please contact your local sales representative.

Software

Linux
13Y004-06

MDIS5 low-level driver sources (MEN) for generic SMBus driver for F14, F15, F17, F18, F19P, F21P, F22P, F75P, G20, G22, D9, D601, F600 and F601, A19, A20, F217, CB70C, SC24, AF2, BC50M, BC50I, BL50W and MH50C

13MD05-90

MDIS5 System (and Device Driver) Package (MEN) for Linux. This software package includes most standard device drivers available from MEN.

Windows
13T010-70

Windows 32-bit network driver (Intel) for XM1, XM1L, XM2, MM2, CB70C, F11S, F18, F18E, F19P, F21P, F22P, F23P, G20, G22, G23, G25A, GM1, GM2, GM3, G211, G211F, SC24, BC50I, BC50M, BL50W, BL50S, BL70W and BL70S

13T019-70

Windows graphics driver (Intel) for XM2 and F19P

13T020-70

Windows 64-bit network driver (Intel) for F18, F18E, F19P, F21P, F22P, F23P, G20, G22, G23, G25A, GM1, GM2, GM3, G211, G211F, XM2, CB70C, SC24, BC50I, BC50M, BL50W, BL50S, BL70W and BL70S

13XM02-77

Windows Installset (MEN) for XM2 and F19P

13T006-70

Windows HD Audio driver (Realtek) for F14, F15, F17, F18, F19P, F21P, F22P, F23P, D9 and A19

13T005-70

Windows USB2UART driver (FTDI) for F14, F15, F17, F18, F19P, F21P, F22P, F23P, D9, A19, A20, XM2 and XM50 / XM51 / F50P / F50C hosts

10F014-78

Windows XP Embedded BSP (MEN) for F11S, F14, F15, F17, F18, F19P, F21P, G20, XM1, XM1L, XM2, MM1, MM2, DC1, DC2, DC13, RC1, BC50I, BC50M, BL50W and BL50S

10Y000-78

Windows Embedded Standard 7 BSP for F19P, F21P, F22P, F23P, G20, G22, G23, CB70C, CB70, XM2, MM2, BC50M, BC50I, BL50W, BL50S, BC70M, BL70S, BL70W, BL70E, DC2, F205, F206, F210, F215, F216, G215, P506, P507 and P511

13T003-70

Windows chipset driver (Intel) for F14, F15, F17, F18, F18E, F19P, F21P, F22P, G20, G22, XM2, CB70C, D9, D6, D7, D601, A19 and A20

VxWorks
13XM01-06

MDIS5 low-level driver sources (MEN) for XM1, XM1L, MM1, MM2, XM2, CB70C, F11S, F19P, F21P, F22P, G20, G22, SC21, SC27 and DC2 board controller

13Y001-06

MDIS5 low-level driver sources (MEN) for LM63 on SMBus for F14, F15, F17, F18, F19P, D9, D601, A19 and A20

13Y004-06

MDIS5 low-level driver sources (MEN) for generic SMBus driver for F14, F15, F17, F18, F19P, F21P, F22P, F75P, G20, G22, D9, D601, F600 and F601, A19, A20, F217, CB70C, SC24, AF2, BC50M, BC50I, BL50W and MH50C

10F019P61

VxWorks 6.9 BSP (MEN) for F19P

10F019P60

VxWorks 6.7 BSP (MEN) for F19P

QNX
10F014-40

QNX 6.3.0 installation support files (QNX and MEN) for F14, F15, F17, F18, F19P, XM1, XM2 and MM1

13XM01-06

MDIS5 low-level driver sources (MEN) for XM1, XM1L, MM1, MM2, XM2, CB70C, F11S, F19P, F21P, F22P, G20, G22, SC21, SC27 and DC2 board controller

13Y001-06

MDIS5 low-level driver sources (MEN) for LM63 on SMBus for F14, F15, F17, F18, F19P, D9, D601, A19 and A20

13Y004-06

MDIS5 low-level driver sources (MEN) for generic SMBus driver for F14, F15, F17, F18, F19P, F21P, F22P, F75P, G20, G22, D9, D601, F600 and F601, A19, A20, F217, CB70C, SC24, AF2, BC50M, BC50I, BL50W and MH50C

10F019P40

QNX 6.4.0 BSP (QNX and MEN) for F19P and XM2

10F019P41

QNX 6.5.0 BSP (QNX and MEN) for F19P and XM2

Firmware/BIOS
This product includes a specially adapted BIOS.
14F019P01
Miscellaneous

Intel software development products such as analyzers, compilers, threading tools etc. can be downloaded under www.intel.com/cd/software/products/asmo-na/eng/index.htm.
IA-32 Intel Architecture Software Developer's Manuals are available under www.intel.com/products/processor/manuals/index.htm.

System Examples

Telecommunications Measurement System

CompactPCI PlusIO telecommunications measurement system for unattended multi-channel probe units for mobile and fix communication systems and services


Power Automation System

CompactPCI PlusIO power automation system with central server unit with flap


Mobile Multimedia Access Unit

Wireless embedded network control system for passenger information and security applications


Internet Access in Trains

Train Protection System

Safe electronic interlocking system for train protection


Application Examples

Track Measurement

The track measurement system is based on a rugged customized CCA housing that is mounted underneath the train.


Wireless Service System

The wireless service system is based on the F19P CompactPCI PlusIO CPU board with an F212 PCI Express Mini Card carrier providing the UMTS and WLAN functionality and an F210 for GPS and serial I/O.


Bottling Facility Control

In this application, a customized F19P CompactPCI PlusIO CPU board supervises the fluid levels during the bottling process.


QoS Testing for Mobile Networks

This CompactPCI PlusIO based system is used for Quality of Service (QoS) testing of mobile networks all over the world.


WLAN Server for Company Buses

The Wi-Fi based CompactPCI WLAN server uses two PCIe Mini Card carriers with up to 18 SIM cards for passenger internet and information services in buses.


Ticketing System

This CompactPCI PlusIO based ticketing system for trains provides customers with onboard wireless prepaid payment services while traveling.


Airstrip Security System Control

This airstrip control system consists of two conduction-cooled 10-slot CompactPCI racks.


Internet Access Systems

Modular 19-inch systems like 3U CompactPCI or CompactPCI Serial are ideal for internet applications in trains like infotainment, exchange of train diagnosis data or transfer of surveillance data.


Train Surveillance Systems

This application is a combination of a digital video recorder and a video display server and is part of a larger communication and surveillance system based on CompactPCI.


Advanced Train Management System

The safety-critical computer system is based on a CompactPCI - CompactPCI Serial hybrid configuration and is certifiable up to SIL 4.