Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575
sales@menmicro.com

RS3 - Managed 8-port Ethernet Switch
 

IP67 Industrial Stand-Alone Device

This product has been discontinued.

The RS3 is a managed industrial, IP67 stand-alone Fast Ethernet switch that provides eight Ethernet channels on M12 connectors.

Download data sheet

  • RS3 Product ImageRS3 Railway Ethernet Switch
  • RS3 Product ImageRS3 configuration example
  • RS3 Product ImageRS3 configuration sample back side
  • RS3 Product ImageRS3 mounting plate sample
  • RS3 Product ImageRS3 mounting plate sample
  • RS3 Product Image
  • RS3 Product Image
  • RS3 Product Image
  • RS3 Product Image
  • RS3 Product Image

Main Features

  • Managed 8-port rugged Ethernet switch
  • Rugged aluminum enclosure (220 x 130 x 70 mm)
  • Fanless and maintenance-free
  • 8 Fast Ethernet ports via M12 connectors
  • Configuration via CLI (RS232, Telnet or SSH), SNMP ver. 3 or ext. dongle
  • 24 VDC nom. (9 to 36 V) power supply and service interface via M12 connectors
  • Status LEDs for ports, power and more
  • -40 to +70(+85)°C operating temperature
  • EN 50155 class Tx (railways) and IP67 compliant
  • Compliant to ISO 7637-2 (E-mark for automotive)
RS3 Product Image

Technical Data

Key Features
  • Simple Switch replacement: configuration can be done via external dongle without any tools
  • High-speed non-blocking, store-and-forward switching
  • Eight 10/100Base-T ports at front panel (Electrical isolation: 1500 Vrms)
  • Port configuration: copper, 10/100 Mbit/s
  • Auto-negotiation / Auto MDI/MDIX crossover on all ports / manual configuration possible
  • Layer2-based Policy Control List
  • 8K MAC address lookup table with automatic learning and aging
  • Up to 4096 VLANs
  • Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol to ensure loop free topology formation
  • Reducing multicast traffic in the network through multicast snooping - IGS (IPv4) and MLDS (IPv6)
Management Firmware System Features
  • Saving and restoring user configurations
  • Software upgrades through TFTP
  • System logs (syslog) and e-mail alerts for critical events
  • Remote monitoring (RMON) and alarm generation
  • Displaying the running configuration in the form of CLI commands
  • Management interfaces through
    • CLI (RS232 console, Telnet, SSH)
    • SNMP v3
  • Switch configuration can be loaded from external dongle
Management Firmware Security Features
  • User authentication using 802.1x
  • Controlling management access through SNMP and CLI only from authorized managers
  • MAC based access list (ACL) for traffic filtering
  • Rate-limiting and storm control to prevent packet flooding from malicious peers
Supported Protocols and Standards
  • DHCP client / server / relay (IEEE 1394)
  • Ethernet flow control (IEEE 802.3x)
  • GARP (VLAN-aware bridging)
  • GVRP/GMRP support (IEEE 802.1D, 2004)
  • Hypertext Transport Protocol (HTTP) Server for Remote Management and Monitoring (RFC2626)
  • HTTP Secure (HTTPS) - HTTP-based Remote Management over encrypted data channel (RFC2818)
  • IGMP snooping / IGMP proxy / IGMP Querier / MLD Discovery (RFC 4541)
  • Link aggregation LACP / EtherChannel (IEEE 802.3ad, 2005)
  • Link Layer Discovery Protocol LLDP (IEEE 802.1ab, 2005)
  • Multiple Spanning Tree (MSTP) (IEEE 802.1s)
  • Path MTU Discovery Protocol (PMTUD) (RFC 1984)
  • Priority-based switching, Quality of Service/DiffServ, tagged frames, Layer2-based 801.1Q VLAN-ID packet routing (IEEE 802.1p)
  • Port-based authentication with EAP (IEEE 802.1x - REV2004/RFC3748)
  • Rapid Spanning Tree Protocol (RSTP IEEE 802.1w)
  • Remote Network Monitoring Information Base v1 (RFC2819)
  • Secure Shell (SSH) for Remote Configuration (CLI) over secure channel
  • Secure Sockets Layer - Encrypted Data Exchange (RFC5246)
  • SNMP v1, v2c, v3 management
  • Syslog (RFC 5424)
  • TCP/IP v4 and v6
  • TFTP (RFC 1350)
  • VLAN/port-based VLANs GVRP/MVRP (IEEE 802.1Q Rev D5.0, 2005)
Service Interface
  • M12 connector at front
  • RS 232 / V24
  • I2C interface for external dongle
Front I/O
  • Eight Ethernet ports via M12 connectors
  • One service interface via M12 connector
  • One power input via M12 connector
  • Link and activity Ethernet status LEDs (2 per channel)
  • Status LEDs for power, reset and error codes
Electrical Specifications
  • Power input
    • Nominal input voltage 24 VDC (9 to 36 V) according to EN50155
  • EN50155 power interruption class S2
  • Isolation (according to EN50155)
    • 1500 Vrms
  • Power consumption: 5 W
Mechanical Specifications
  • Dimensions: 220 mm x 130 mm x 70 mm (without connectors)
  • Prepared for wall or DIN-rail mounting with special mounting plates (available separately)
  • Weight: 1.9 kg
Environmental Specifications
  • Temperature range (operation):
    • -40..+70°C (+85°C) with up to 85°C for 10 minutes according to class Tx (EN50155)
    • Airflow: natural convection
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to + 3000 m
  • Shock: 50 m/s², 30 ms (EN 61373)
  • Vibration (function): 1 m/s², 5 Hz - 150 Hz (EN 61373)
  • Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz (EN 61373)
  • Climatic tests according to EN50155 and EN68068
  • Fully EN 50155-compliant (Power Interruption Class 2, Temperature Class Tx)
  • IP67 compliant
MTBF
669 843 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
Flammability (PCBs)
  • PCBs manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
  • Tested according to the following railway standards:
    • EN50121 (radio disturbance)
    • EN61000-4-2 (ESD)
    • EN61000-4-3 (radiated disturbances)
    • EN61000-4-4 (burst)
    • EN61000-4-5 (surge)
  • Conforming to E1 requirements of the German Federal Motor Transport Authority
  • Tested according to the following automotive standards:
    • CISPR25/CISPR16 (radiated emission)
    • ISO7637-2 (conducted emission - power line)
    • ISO7637-2 (conductive immunity - power line)
    • ISO7637-3 (capacitive immunity - signal line)
    • ISO11452-2, ISO11452-5 (radiation immunity)
    • EN50121 (radio disturbance)
Software Support
Firmware for configuration and management included

Options

Ethernet Switch Functions / Mechanical Specifications
4 Ethernet ports
Electrical Specifications
Other nominal input voltages: 36, 48, 72, 96 or 110 VDC
  • Wide input range (according to EN50155): 0.7 x nominal voltage < nominal voltage < 1.25 x nominal voltage

Ordering Information

Software

Firmware/BIOS
14ETSW-00

Ethernet Switch Firmware for managed RSx, SFx, F302 and G302 models

Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).