Log in News & Media | Downloads | Corporate | Careers | Legal Notes
(215) 542-9575
sales@menmicro.com

G211 - Quad Gigabit Ethernet Interface

3U CompactPCI Serial

The G211 quad Ethernet interface is a rugged single Eurocard CompactPCI Serial peripheral board.

Download data sheet

  • G211 Product ImageG211 with RJ45 connectors
  • G211 Product ImageG211 with M12 connectors
  • G211 Product Image
  • G211 Product Image

Main Features

  • Four 10/100/1000Base-T Ethernet channels
  • Alternatively two redundant channel pairs
  • Full-duplex or half-duplex
  • RJ45 or robust M12 connectors
  • Fully integrated to comply with IEEE802.3u
  • 1500 V isolation voltage
  • -40 to +85C screened
  • PICMG CPCI-S.0CompactPCI Serial peripheral card
G211 Product Image

Technical Data

Ethernet Interfaces
  • Four 10/100/1000Base-T interfaces
  • IEEE802.3x support
    • Full-duplex flow control
    • Half-duplex back pressure collision flow control
    • 1 Gbit/s data transfer rate for each interface, even if all four interfaces are used simultaneously
  • 4x2 status LEDs to signal link status and activity
Front Connections
Four standard 8-pin RJ45 or M12 receptacle connectors
CompactPCI Serial
  • Compliance with CompactPCI Serial PICMG CPCI-S.0 Specification
  • Peripheral slot
  • Host interface: One PCI Express x4 link
    • PCIe 2.0 support
    • Data rate up to 2 GB/s in each direction (5 Gbit/s per lane)
Electrical Specifications
  • Isolation voltage: 1500V between Ethernet links and between Ethernet links and shield or ground
  • Supply voltage/power consumption:
    • +12V (-5%/+5%), 3.5 W typ/ 6 W max.
Mechanical Specifications
  • Dimensions: conforming to CompactPCI Serial specification for 3U boards
  • Weight: 240 g (with heat sink)
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C (screened)
    • Airflow: min. 1.0 m/s
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to + 3,000 m
  • Shock: 15 g, 11 ms
  • Bump: 10 g, 16 ms
  • Vibration (sinusoidal): 2 g, 10..150Hz
  • Conformal coating on request
MTBF
MTBF: 324,639h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), EN 61000-4-2 (ESD), EN 61000-4-4 (burst) and EN 61000-4-5 (surge)
Software Support
  • Windows
  • Linux
  • QNX
  • VxWorks

Options

Ethernet
  • Four RJ45 connectors at the front panel
  • Four M12 connectors at the front panel
Operating Temperature
  • Depends on system configuration
  • Maximum: +85°C
  • Minimum: -50°C
Cooling Concept
Also available with conduction cooling in MEN CCA frame
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.

Ordering Information

Standard G211 Models
02G211-00

4 1000Base-T Ethernet interfaces, 4 RJ45 connectors at front, 0..+60°C

02G211-01

4 1000Base-T Ethernet interfaces, 4 M12 connectors at front, -40..+85°C screened, conformal coating

Software

Linux
13T001-90

Linux network driver (MEN) for G211, G211F, GM1, GM2 and GM3

Windows
13T010-70

Windows 32-bit network driver (Intel) for XM1, XM1L, XM2, MM2, CB70C, F11S, F18, F18E, F19P, F21P, F22P, F23P, G20, G22, G23, G25A, GM1, GM2, GM3, G211, G211F, SC24, BC50I, BC50M, BL50W, BL50S, BL70W and BL70S

13T020-70

Windows 64-bit network driver (Intel) for F18, F18E, F19P, F21P, F22P, F23P, G20, G22, G23, G25A, GM1, GM2, GM3, G211, G211F, XM2, CB70C, SC24, BC50I, BC50M, BL50W, BL50S, BL70W and BL70S

VxWorks

VxWorks version 6.9 and higher supports the G211, already including the necessary drivers. There is no need to install additional driver software.

QNX

QNX version 6.5.0 and higher supports the G211, already including the necessary drivers. There is no need to install additional driver software.