Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575
sales@menmicro.com

F701 - MVB Interface Card

3U CompactPCI

The F701 is a MVB (Multifunction Vehicle Bus) to CompactPCI interface and consists of a MVB controller, a local CPU and a CompactPCI slave interface.

Download data sheet

  • F701 Product ImageF701 3U CompactPCI MVB Interface Card
  • F701 Product ImageF701 - MVB Interface Card
  • F701 Product ImageF701 - MVB Interface Card
  • F701 Product Image
  • F701 Product Image
  • F701 Product Image

Main Features

  • 4HP 32-bit/33-MHz CompactPCI
  • MVB Interface EMD/ESD+ according to IEC 61375 (TCN Standard)
  • MVB Bus Administrator
  • 4096 Process Data ports
  • Message Data stack
  • Driver support for WinXP, Win7 32/64bit and Linux
  • -40°C to +70°C screened
F701 Product Image

Technical Data

MVB Multifunction Vehicle Bus Interface
  • Data rate: 1.5 Mbit/s
  • Data frame size: 16 - 256 bits
  • Cyclic transmission of process data (PD) (broadcast)
    • Control and status information
    • Periodic broadcast communication: 16-512 ms, 1 ms possible (real-time)
    • Up to 4096 telegrams (ports), at max. 32 bytes each
  • Event driven message data transfer (MD) (point-to-point)
    • For online diagnostics, passenger information in normal operation
    • For firmware download and collecting debugging data in field service
    • On demand communication
    • Destination addressed
    • Response time: > 0,5 sec
  • Bus Administrator communication manager (BA)
    • Synchronous, time-multiplexed communication
    • Transmission data sequence organization (master_frame - slave_frame)
  • Full redundancy support
  • Physical layers
    • ESD + (Electrical Short Distance) or EMD (Electrical Middle Distance)
    • 20 m (ESD+) or 200 m (ESD+ and EMD), 32 nodes
    • Galvanic isolation
    • Compliant to TCN standard IEC 61375
  • MVB Connectors
    • Two 9-pin D-Sub connectors on the front panel
    • Both male (MVB 1) and female (MVB 2) D-Sub connectors
    • Direct connection between D-Subs is possible
    • M3 metric inner threading
CompactPCI Interface
  • 32-bit/33-MHz at connector J1
  • Signaling voltage: +5.0 V
  • Compliant with PICMG 2.0 R3.0
  • For data communication path between F701 and host
Serial Line Interface
  • For software debugging
  • Transmission parameters: 115 kBaud
  • Handshake lines: None
JTAG Interface
For debugging and loading the flash memory
Memory
  • 256 KB SRAM
    • Traffic Memory for MVB interface
  • 256 - 1280 KB SRAM
    • General purpose memory
  • 1 MB Flash
Software Structure Configurations
  • MDFULL
    • Passive interface
    • Communication capabilities: PD and BA
  • SERVER
    • Active interface
    • Communication capabilities: PD, MD and BA
Miscellaneous
  • Diagnostic by LED
    • 8 diagnostic LEDs
    • Used for self test purposes
    • Displays the test number
    • Indicates reason for failure
  • Reset Mechanism
    • Onboard under-voltage supervision circuitry
  • Power Up (PLD Loading)
    • Automatically loads the PLD chips after power-on
Mechanical Specifications
  • Dimensions (L x W x H): 160 mm x 100 mm x 20.32 mm
  • Weight: 158 g
Environmental Specifications
  • Temperature range (operation): -40..+85°C
  • Relative humidity: max. 95%
  • Altitude: Max 1800 m
  • Shock: 50 m/s² (duration 50 ms)
  • Vibration:
    • 2 mm for 5 - 25 Hz
    • 50 m/s² for 25 - 150 Hz
  • RFI susceptibility from 0,15 to 2000 MHz: 20 V/m (class FS2 in EN50155)
  • Conformal coating (standard)
Operating Systems
  • Windows 7
  • Linux (tested with Ubuntu 14.04 LTS)
  • For information on additional operating systems, please contact our sales staff.
  • For more information on supported operating system versions and drivers see Software.
Standards Conformity
  • EN 50121-3-2:2006: Electromagnetic compatibility
  • IEC 61375-1:2007: MVB physical layer isolation
  • EN 50155:2007 12.2.9: Isolation measurement test/voltage resistance test
  • EN 50155:2007 4.1.3: Shock and vibration
  • IEC 61375-1:2007: MVB (Clause 3, Multifunction Vehicle Bus)
  • EN 60068-2-30:2006: Humidity

Options

MVB Interface
  • ESD+ (Electrical Short Distance)
  • EMD (Electrical Middle Distance)
MVB Software Protocols
  • Configuration MDFULL
    • For applications requiring Process Data (PD) only
  • Configuration SERVER
    • For applications requiring Process Data (PD) and Message Data (MD)
  • Bus Administrator (BA) optional

Ordering Information

Standard F701 Models
02F701A00

MVB ESD+ Device, Process and Message Data, -40..+70°C screened, conformal coating

02F701A01

MVB ESD+ Bus Administrator, Process and Message Data, -40..+70°C screened, conformal coating

02F701B00

MVB EMD Device, Process and Message Data, -40..+70°C screened, conformal coating

02F701B01

MVB EMD Bus Administrator, Process and Message Data, -40..+70°C screened, conformal coating

Software

Linux
13F701-90

Linux MDFULL MVB driver (duagon)

13F701-91

Linux SERVER MVB driver (duagon)

Windows
13F701-70

Windows 7 MDFULL MVB driver (duagon)

13F701-71

Windows 7 SERVER MVB driver (duagon)

Miscellaneous

For further information or additional documentation, please contact either MEN sales or duagon directly www.duagon.com.

Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).