Follow Us
GP2 - 4-Port Gigabit SFP PHY Line Card
3U CompactPCI Serial
The GP2 is a 3U Gigabit Ethernet PHY line card implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on SFP cages.
GP2 Gigabit Active Port Adapter Card for SFP Modules
GP2 Gigabit Active Port Adapter Card for SFP Modules
NH30 - Rugged 4U, 40 HP Modular Managed Gigabit Ethernet Switch
Main Features
- 100/1000 Mbit/s SFP modules supported
- FX / SX / LX / ZX modules supported
- 4 SFP cages
- LEDs for link and activity status
- -40 to +85°C with qualified components
- EN 50155 classTx (railways)
- PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance)
Technical Data
- CISCO GLC-SX-MM, 1 Gbps BASE-SX, 220/500 m, 0 to +70°C
- AVAGO ABR-5710 ALZ, 1 Gbps BASE-SX, 250/550 m, -40 to +85°C
- Finisar FTLF8519P3BTL, 1 Gbps BASE-SX, 300/500 m, -40 to +85°C
- Finisar FTLF1318P3BTL, 1 Gbps BASE-LH, 10 km, -40 to +85°C
- Finisar FTLF1518P1BTL, 1 Gbps BASE-ZX, 80 km, -40 to +85°C
- AVAGO ABR-57R5APZ, 4.25 Gbps BASE-SX, 300 m @ 2.125 Gbps, -10 to +85°C
- Ethernet
- Four SFP slots, 1000BASE-SX/LX/ZX (1 Gbit/s)
- Status LEDs
- Two LEDs for each SFP slot
- Signal link status
- Signal link activity
- Serial GPIO (SGPIO)
- Quad Serial Gigabit Interface (QSGMII)
- Peripheral slot with extensions (QSGMII)
- BITE Voltage Supervision
- Voltage monitoring
- Supply voltages
- +12 V (±10%)
- Power consumption
- 5 W (max. 15 W depending on SFP modules)
- Dimensions: 3U, 4 HP
- Weight: 136 g
- Temperature range (operation):
- -40°C to +85°C
- Airflow 1.5m/s
- Temperature range (storage): -40°C to +85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300 m to +2000 m
- Shock: 50 m/s², 30 ms
- Vibration (Function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
- Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)
- Flammability (PCBs)
- UL 94 V-0
- Electrical Safety
- EN 50155 (Insulation)
- EN 50155 (Voltage)
- EN 55022 (radio disturbance)
- EN 61000-4-2 (ESD Immunity)
- EN 61000-4-4 (burst)
Ordering Information
3U CompactPCI Serial, QSGMII to 4 x SFP 1GB port extender EEE and Sync-E support, -40 to +85°C
25-port managed Gigabit Ethernet switch, 2x RJ45 + 1x SFP 2.5 Gbit/s on front, 10x Gb Ethernet + 3x QSGMII, Gen 1 management firmware, -40 °C to +85 °C
Details
3U CompactPCI Serial, 4 x M12 QSGMII port extender, PoE+ PSE, EEE and Sync-E support, -40 to +85°C, conformal coated
Details 3U CompactPCI Serial, 4 x M12 QSGMII port extender, no PoE, EEE and Sync-E support, -40 to +85°C, conformal coated
Details 3U CompactPCI Serial, 4 x RJ45 QSGMII port extender, PoE+ PSE, EEE and Sync-E support, -40 to +85°C
Details
4x M12 X-coded Gigabit Ethernet line card for CompactPCI Serial Switches G101 and G102, PoE+ PSE (60 W max), EEE and Sync-E support, -40 °C to +85 °C, conformal coating
Details
3U CompactPCI Serial, 4 x M12 passive Ethernet port extender with PoE+, -40 to +85°C, conformal coated
Details 4x M12 X-coded Gigabit Ethernet line card for CompactPCI Serial Switches G101 and G102, no PoE, with EEE/SyncE and IEEE1588v2 support, -40 °C to +85 °C, conformal coating
Details 3U CompactPCI Serial, 4 x M12 passive Ethernet port extender, no PoE, -40 to +85°C, conformal coated
Details 24-port managed Gigabit Ethernet switch, 3x M12 A-coded on front, 9x Gb Ethernet + 3x QSGMII on backplane, Gen 2 management firmware, -40 °C to +85 °C, conformal coating
Details 24-port managed Gigabit Ethernet switch, 3x M12 A-coded on front, 9x Gb Ethernet + 3x QSGMII on backplane, Gen 1 management firmware, -40 °C to +85 °C, conformal coating
Details 25-port managed Gigabit Ethernet switch, 2x RJ45 + 1x SFP 2.5 Gbit/s on front, 10x Gb Ethernet + 3x QSGMII, Gen 2 management firmware, -40 °C to +85 °C
Details
NH30, 19" 4U/40HP modular managed Gigabit Ethernet Switch, -40 to +85°C
The NH30 is a build-to-order system. It consists of the 40 HP basic system including backplane and mounting rails and provides:
- 2 PSU slots
- 1 CompactPCI Serial based system slot (Switch Board)
- 6 CompactPCI Serial based peripheral slots
- All peripheral slots are capable of supporting a mix of various types of connectors (RJ45, M12, SFP)
- All peripheral slots offer additional PoE+ support
The boards and accessories listed in the Technical Data can be implemented in the system.
Choose the functionality you need using the BTO configurator and the BTO Configuration Guide.
Contact MEN's sales team for more information.