Follow Us
GP3 - 4-Port Gigabit Copper Ethernet Line Card with PoE
3U CompactPCI Serial
The GP3 is a 3U Gigabit Ethernet PHY line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on M12 X-coded connectors. Alternatively, the GP3 can be supplied with four RJ45 connectors on the front panel.
GP3 Gigabit Ethernet PHY line card with M12 X-coded connectors
GP3 Gigabit Ethernet PHY line card with M12 X-coded connectors
Main Features
- 4 Gigabit Ethernet on M12 X-coded connectors
- Power over Ethernet (PoE+) PSE (all ports)
- LEDs for link and activity status
- -40 to +85°C (screened)
- EN 50155 classTx (railways)
- PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance)
- IEEE 1588v2 support (optional)
Technical Data
- Four 10/100/1000BASE-T ports at front panel
- One common isolation group when PoE PSE is installed
- Optional PoE(+) Power sourcing support
- IEEE 1588v2 optional
- IEEE 802.3 Standard
- Power over Ethernet support (IEEE 802.3 Section 2, Type 1 and 2 - classes 0, 1, 2, 3, 4)
- EEE (Energy Efficient Ethernet)
- PSE (Power Sourcing Equipment) function
- Supports supply classes 0 to 4
- Supplies up to four powered devices (up to 60 W total)
- Ethernet
- Four M12 X-coded connectors, 1000BASE-TX (1 Gbit/s)
- Power over Ethernet PSE
- Status LEDs
- Two LEDs per channel
- Signal link status
- Signal link activity
- Serial GPIO (SGPIO)
- Quad Serial Gigabit Interface (QSGMII)
- Peripheral slot with extensions (QSGMII)
- BITE Voltage Supervision
- PoE Voltage monitoring
- Supply voltages
- +12 V (±3%)
- Power consumption
- 5 W without PoE support, 85 W max. with 60 W PoE
- Dimensions: 3U, 4 HP
- Weight: 152 g
- Temperature range (operation):
- -40°C to +85°C
- Airflow 1.5m/s
- Temperature range (storage): -40°C to +85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300 m to +2000 m
- Shock: 50 m/s², 30 ms
- Vibration (Function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
- Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)
- Flammability (PCBs)
- UL 94 V-0
- Electrical Safety
- EN 50155 (Insulation)
- EN 50155 (Voltage)
- EN 55022 (radio disturbance)
- EN 61000-4-2 (ESD Immunity)
- EN 61000-4-4 (burst)
Ordering Information
4x M12 X-coded QSGMII Gigabit Ethernet line card for CompactPCI Serial Switches G101 and G102, no PoE, EEE and SyncE support, -40 to +85°C with qualified components, conformal coated
4x M12 X-coded QSGMII Gigabit Ethernet line card for CompactPCI Serial Switches G101 and G102, PoE+ PSE (60W max), EEE and Sync-E support, -40 to +85°C with qualified components, conformal coated
25-port managed Gigabit Ethernet switch, 2x RJ45 + 1x SFP 2.5 Gbit/s on front, 10x Gb Ethernet + 3x QSGMII, Gen 1 management firmware, -40 °C to +85 °C
Details
3U CompactPCI Serial, 4 x M12 QSGMII port extender, PoE+ PSE, EEE and Sync-E support, -40 to +85°C, conformal coated
Details 3U CompactPCI Serial, 4 x M12 QSGMII port extender, no PoE, EEE and Sync-E support, -40 to +85°C, conformal coated
Details 3U CompactPCI Serial, 4 x RJ45 QSGMII port extender, PoE+ PSE, EEE and Sync-E support, -40 to +85°C
Details 3U CompactPCI Serial, 4 x RJ45 QSGMII port extender, no PoE, EEE and Sync-E support, -40 to +85°C
Details
4x M12 X-coded QSGMII Gigabit Ethernet line card for CompactPCI Serial Switches G101 and G102, PoE+ PSE (60W max), EEE and Sync-E support, -40 to +85°C with qualified components, conformal coated
Details
3U CompactPCI Serial, 4 x M12 passive Ethernet port extender with PoE+, -40 to +85°C, conformal coated
Details 4x M12 X-coded Gigabit Ethernet line card for CompactPCI Serial Switches G101 and G102, no PoE, with EEE/SyncE and IEEE1588v2 support, -40 to +85°C with qualified components, conformal coated
Details 3U CompactPCI Serial, 4 x M12 passive Ethernet port extender, no PoE, -40 to +85°C, conformal coated
Details 24-port managed Gigabit Ethernet switch, 3x M12 A-coded on front, 9x Gb Ethernet + 3x QSGMII on backplane, Gen 2 management firmware, -40 °C to +85 °C, conformal coating
Details 24-port managed Gigabit Ethernet switch, 3x M12 A-coded on front, 9x Gb Ethernet + 3x QSGMII on backplane, Gen 1 management firmware, -40 °C to +85 °C, conformal coating
Details 25-port managed Gigabit Ethernet switch, 2x RJ45 + 1x SFP 2.5 Gbit/s on front, 10x Gb Ethernet + 3x QSGMII, Gen 2 management firmware, -40 °C to +85 °C
Details
NH30, 19" 4U/40HP modular managed Gigabit Ethernet Switch, -40 to +85°C
The NH30 is a build-to-order system. It consists of the 40 HP basic system including backplane and mounting rails and provides:
- 2 PSU slots
- 1 CompactPCI Serial based system slot (Switch Board)
- 6 CompactPCI Serial based peripheral slots
- All peripheral slots are capable of supporting a mix of various types of connectors (RJ45, M12, SFP)
- All peripheral slots offer additional PoE+ support
The boards and accessories listed in the Technical Data can be implemented in the system.
Choose the functionality you need using the BTO configurator and the BTO Configuration Guide.
Contact MEN's sales team for more information.