Log in News & Media | Downloads | Corporate | Careers | Legal Notes
(215) 542-9575
sales@menmicro.com

P506 - Quad CAN Bus Interface PMC

PCI Mezzanine Card

The P506 is a mezzanine PMC with four CAN interfaces supporting CANopen and CAN Layer 2.

Download data sheet

  • P506 Product ImageP506 Quad CAN Bus Interface PMC
  • P506 Product Image

Main Features

  • 32-bit/33-MHz PMC
  • Full CAN/Extended CAN
  • 4 independent channels
  • ISO high-speed coupling
  • Up to 1 Mbit/s data transfer rate
  • CANopen master and slave support
  • CAN Layer 2 support
  • Isolation between channels
  • Compliant to ISO 11898-1 and ISO 11898-2
  • -40 to +85°C with qualified components
P506 Product Image

Technical Data

CAN Interface
  • Compliant to ISO 11898-1 and ISO 11898-2
  • Four channels
  • CAN Protocol Version 2.0A/B
    • Standard and extended data frames
    • 0..8 bytes data length
    • Programmable data rate up to 1 Mbit/s
  • Support for remote frames
  • 5 receive buffers (FIFO-scheme)
  • 3 transmit buffers with prioritization
  • Maskable identifier filter
  • Programmable loop-back mode for self-test operation
  • Signaling and interrupt capabilities for receiver and transmitter error states
Memory
  • 32MB SDRAM memory
    • Soldered
    • DDR2
    • 132MHz memory bus frequency
    • FPGA-controlled
  • 2MB non-volatile Flash
    • For FPGA data and Nios firmware
    • FPGA-controlled
FPGA
  • Standard factory FPGA configuration:
    • Main bus interface
    • Interrupt controller, SMBus controller
    • 16Z029_CAN - CAN Controller
    • 16Z043_SDRAM - SDRAM controller
    • 16Z045_FLASH - Flash interface
    • 16Z034_GPIO - GPIO controller
    • 16Z034_PWM - PWM Pulse Width Modulation
  • The FPGA offers the possibility to add customized I/O functionality. See FPGA.
PMC Characteristics (PCI)
  • Compliant with PCI Specification 2.2
  • 32-bit/33-MHz, 3.3V V(I/O)
  • Target
Peripheral Connections
Via front panel on a shielded 50-pin HP D-Sub SCSI 2 receptacle connector
Electrical Specifications
  • Isolation voltage:
    • 500 VAC
  • Supply voltage/power consumption:
    • +5V (-3%/+5%), 240mA
    • +3.3V (-5%/+5%), 15mA
Mechanical Specifications
  • Dimensions: conforming to IEEE 1386.1
  • Weight: 78g
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C (qualified components)
    • Airflow: min. 1.0m/s
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 3,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 1g/10..150Hz
  • Conformal coating on request
MTBF
957 834 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Conforming to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
Software Support
  • Windows
  • Linux
  • VxWorks
  • QNX
  • For more information on supported operating system versions and drivers see Software.

FPGA

Options

CPU
Nios soft core implementation possible (e.g. for real-time Ethernet)
Rear I/O
Via Pn4 rear I/O connector
Cooling
Conduction Cooling
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.

Ordering Information

Standard P506 Models
15P506-00

Quad CAN bus interface, 4 CAN cores, front I/O, for convection cooled systems, -40..+85°C with qualified components

Software

Linux
13MD05-90

MDIS5 System (and Device Driver) Package (MEN) for Linux. This software package includes most standard device drivers available from MEN.

13Z016-06

MDIS5 driver (MEN) for 16Z029_CAN (CANopen master)

13Z061-06

MDIS5 low-level driver sources (MEN) for 16Z061_PWM

Windows
10Y000-78

Windows Embedded Standard 7 BSP for F19P, F21P, F22P, F23P, G20, G22, G23, CB70C, CB70, XM2, MM2, BC50M, BC50I, BL50W, BL50S, BC70M, BL70S, BL70W, BL70E, DC2, F205, F206, F210, F215, F216, G215, P506, P507 and P511

13P506-77

Windows Installset (MEN) for P506

13Z016-70

MDIS5 Windows driver (MEN) for 16Z029_CAN (CANopen master)

VxWorks
13Z015-06

MDIS5 low-level driver sources (MEN) for 16Z029_CAN (MSCAN/Layer2)

13Z016-06

MDIS5 driver (MEN) for 16Z029_CAN (CANopen master)

13Z061-06

MDIS5 low-level driver sources (MEN) for 16Z061_PWM

QNX
13Z015-06

MDIS5 low-level driver sources (MEN) for 16Z029_CAN (MSCAN/Layer2)

13Z016-06

MDIS5 driver (MEN) for 16Z029_CAN (CANopen master)

13Z061-06

MDIS5 low-level driver sources (MEN) for 16Z061_PWM