PX50 - CANopen Communication Interface
PCI Express Mini Card
The PX50 is a Mini PCI Express CANopen controller board
Main Features
Technical Data
- Supported communication determined by firmware:
- CANopen Master
- CANopen Slave
- CANopen Master
- Maximum nodes: 126
- Maximum cyclic data: 7168 Bytes
- Service Data Object (SDO) up and download: max 200 Bytes/Request
- Emergency consumer/producer
- Functions: guarding and heartbeat protocols, Process Data Objects (PDO) mapping, network management, SYNC.
- PDO communication synchronized, remotely requested and event driven with max. 512 Rx/TXPDO
- CANopen Node
- Maximum cyclic data: 1024 Bytes
- Emergency producer
- Functions: guarding and heartbeat protocols, Process Data Objects (PDO) mapping, network management, SYNC.
- PDO communication synchronized, remotely requested and event driven with max. 64 Rx/TXPDO
- Transmission rate: up to 1 MBit/s
- Interface to PC card: cable connector fieldbus X1
- Type ISO-11898: 9-pin D-Sub male connector
- Galvanic isolation
- LED display
- 1000 VDC isolation voltage
- 8 MB SDRAM
- 4 MB serial Flash EPROM
- 64 KB Dual-Port Memory (DPM)
- 128 KB MRAM
- Mini PCI Express, one-lane port
- DPM or DMA data access
- Supply voltage/maximum current
- +3.3 V DC ±5% / 600 mA
- Connected via Mini PCI Express bus
- Dimensions (L x W x H): 51 x 30.2 ±0.1 x 12.5 mm
- PCI Express Mini system connector (3.3 V)
- Weight Mini PCI Express card: 18 g
- Weight CANopen assembly: 14 g
- Temperature range (operation): -20..+70°C
- Temperature range (storage): -10..+70°C
- Relative humidity: max. 95% non-condensing
- EN 55011:2009 + A1:2010, CISPR 11:2009, Class A (radio disturbance)
- EN 61000-4-2:2009 (electrostatic discharge)
- EN 61000-4-3:2006 + A1:2008 + A2:2010 (radiated, radio-frequency, electromagnetic field immunity)
- EN 61000-4-4:2004 + A1:2010 (burst electrical fast transients/burst)
- EN 61000-4-5:2006 (surge)
- EN 61000-4-6:2009 (to conducted disturbances, induced by radio- frequency fields)
- EN 61000-4-8:2010 (power frequency magnetic field)
- EN 61000-6-2:2005 + B1:2011 (for industrial environments)
- UL-File-Nr. E221530
- Windows
- Windows CE
- Linux
- VxWorks (on request)
- QNX (on request)
- Configuration software master and slave:
- SYCON.net
- Configuration Software Slave:
- netX Configuration Tool
- For more information regarding drivers and firmware, please visit:
- Mini PCI Express Communication Interface for CANopen master
- Mini PCI Express Communication Interface for CANopen slave
Ordering Information
This board can only be ordered together with an MEN box or panel PC.
PCI Express Mini Card, CANopen Slave interface, Hilscher
PCI Express Mini Card, CANopen Master interface, Hilscher
Intel Atom x7-E3950, 1.6 GHz, 8 GB DDR3 DRAM, ECC, 32 GB eMMC, 24 VDC and 36 VDC nom. (10 V to 50.4 VDC) class S2 PSU with ignition, -40 °C to +85 °C, conformal coating, compliant to EN 50155, prepared for ISO 7637-2 (E-mark for automotive)
DetailsThis board can only be ordered together with an MEN box or panel PC.
Software

Linux driver (Hilscher netX) for CANopen, PROFIBUS, DeviceNET, EtherNET/IP, EtherCat, PROFINET, OpenModBus, Sercos, Varan for F750, F751, F752, F753, PX50, PX51, PX52 and PX53.

Windows and Windows CE software for Hilscher boards, as well as firmware and additional documentation can be downloaded directly from the following links: Hilscher Software and Hilscher Support and Downloads

VxWorks 5.4 / 6.2 driver (Hilscher netX) for CANopen, PROFIBUS, DeviceNET, EtherNET/IP, EtherCat, PROFINET, OpenModBus, Sercos, Varan for F750, F751, F752, F753, PX50, PX51, PX52 and PX53.

QNX 6.4/6.5 driver (Hilscher netX) for CANopen, PROFIBUS, DeviceNET, EtherNET/IP, EtherCat, PROFINET, OpenModBus, Sercos, Varan for F750, F751, F752, F753, PX50, PX51, PX52 and PX53.
A large range of corresponding driver software, software updates, firmware and firmware updates, as well as additional technical documentation is available at www.hilscher.com.