Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575

SA18 - USB 1.1 Interface Adapter


The SA18 provides the transceiver part of a USB 1.1 interface, using a standard type A connector and connected by a ribbon cable.

Download data sheet

  • SA18 Product ImageSA18 USB 1.1 SA-Adapter
  • SA18 Product Image

Main Features

  • 1 USB 1.1 channel
  • Standard USB connector (Type A)
SA18 Product Image

Technical Data

  • USB 1.1
  • Data rates up to 12Mbit/s
  • OHCI implementation
  • Up to 127 devices controlled by one controller
  • Support of all transfer modes (control, interrupt, bulk, isochronous)
  • Self powered hub functionality
Peripheral Connection
  • Type A connector at front panel
  • Power line pin overcurrent limited and fused against short cicuit
  • Thermal shutdown
  • Nominal load 5 USB units (5V/0.5A)
  • Data signal lines protected from transient voltages
Via ribbon cable
Electrical Specifications
  • Supply voltage/power consumption:
    • +5V (-3%/+5%), 600mA typ./max.
  • MTBF: tbd. (derived from MIL-HDBK-217F)
Mechanical Specifications
  • Dimensions: 32mm x 42mm
  • Weight: 20g
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C
    • Airflow: min. 10m³/h
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 3,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 2g/10..150Hz
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
Tested according to EN55022 / 1999-05 (radio disturbance) and EN 55024 /1999-05 (immunity)

Ordering Information


Data Sheets
Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).