Follow Us
SA24M - IBIS Master
SA-Adapter
The SA24M is an IBIS master interface adapter with one IBIS master interface.
SA24M - IBIS Master SA-Adapter
SA24M - IBIS Master SA-Adapter
Main Features
- 1 channel master
- Over-current and short-cut protection
- Optical isolation
- -40 to +85°C screened
Technical Data
Interfaces
- IBIS master on front connector
- External 24V power supply on front connector for IBIS signal level
- Standard IBIS data rate (1200 bit/s) up to standard UART data rate (up to 9600 bit/s)
- Serial TTL Interface on 10-pin SA-Adapter connector
Installation
- As a piggy-back board directly on a carrier board
- Via ribbon cable
Peripheral Connections
Via front panel on a shielded 9-pin D-Sub receptacle connector
Electrical Specifications
- Isolation voltage:
- 750V DC or 500V AC between isolated side and digital side
- Supply voltage/power consumption:
- Digital side +5V (-3%/+5%), 10 mA typ. (25 mA max.)
- Isolated side +24V (-30%/+25%), 10mA typ. (110 mA max., when loopback on pin 1/2)
- MTBF: tbd @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
- Dimensions: 32mm x 42mm
- Weight:
- 18g (Master)
Environmental Specifications
- Temperature range (operation):
- -40..+85°C (qualified)
- Temperature range (storage): -40..+85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300m to + 3,000m
- Shock:
- 50 m/s², 30 ms (EN 61373)
- 15 g, 11 ms (EN 60068-2-27)
- Vibration (function): 2.02 m/s², 5 Hz to 150 Hz (EN 61373)
- Vibration (lifetime): 11.44 m/s², 5 Hz to 150 Hz (EN 61373)
- Conformal coating
Safety
Flammability (PCBs)
- UL 94 V-0
EMC
- EN 50121-3-2 (conducted disturbance)
- IEC 61000-4-4 (burst)
- IEC 61000-4-6 (conducted disturbances)
Ordering Information
Standard SA24M Models
08SA24M00
IBIS master interface, conformal coating, -40°C to +85°C (screened)
08SA24M01
IBIS master interface, -40°C to +85°C (screened)