F606 - Side Card Gb Ethernet
3U CompactPCI
The F606 is a 4HP dual Gigabit Ethernet extension card for 3U Intel based CompactPCI single-board computers. It can be used in combination with the F14 and compatible CPU boards.
Main Features
Technical Data
I/O
- Ethernet
- Two 10/100/1000Base-T Ethernet channels
- Lemo connectors at front panel
- Ethernet controllers are connected by two x1 PCIe links
- Two onboard LEDs for each channel to signal LAN Link, Activity status and connection speed
- UART
- One at front panel
- Physical interface using SA-Adapter via 10-pin connector
- RS232..RS422, isolated or not
- Only full duplex operation for RS422
- Data rates up to 1 Mbit/s
- FIFO receive and transmit buffers for high data throughput
- Handshake lines: full support; lines depend on SA-Adapters
- SA-Adapter has to be installed at the factory
Mass Storage
Serial ATA (SATA)
- One port for onboard 2.5" hard-disk drive
- Transfer rates up to 150MB/s (depends on hard disk)
- RAID level 0/1 support (depends on CPU board)
Miscellaneous
CompactPCI J1 is assembled for increased mechanical stability and/or for power supply
Electrical Specifications
- Supply voltage/power consumption:
- +5V (-3%/+5%), 600mA typ. (w/o hard disk)
- +3.3V (-3%/+5%), 1.6A typ. (w/o hard disk)
- MTBF: 1,290,994h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
- Dimensions: conforming to CompactPCI specification for 3U boards
- Mountable on right (standard) or left (option) side of the CPU
- Weight: 150g (w/o hard disk and SA-Adapters)
Environmental Specifications
- Temperature range (operation):
- -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
- Airflow: min. 10m³/h
- Temperature range (storage): -40..+85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300m to + 3,000m
- Shock: 15g/11ms
- Bump: 10g/16ms
- Vibration (sinusoidal): 1g/10..150Hz
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)
Software Support
Driver software can be found in the data sheet of the CPU board that you use.
Options
Mass storage
CompactFlash interface instead of SATA hard disk
- Via AD95 adapter
I/O
- USB
- Two USB 2.0 host ports via rear I/O
- Ethernet
- 9-pin D-Sub connectors instead of Lemo connectors
- UART
- Second interface via SA-Adapter on additional slot
Mechanical
- Mounting of side card on left side of the CPU
- 8HP with additional SA-Adapter
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.
Ordering Information
Standard F606 Models
02F606-00
2 Gigabit Ethernet on Lemo railway compliant connectors, 1 COM extension (SA-Adapter not included), SATA hard disk slot, for F14 and compatible SBCs, conformally coated, -40...+85°C screened
This product can be ordered until 2019-03-30 Miscellaneous Accessories
0710-0038
HDD SATA 2.5", 100 GB, 1.5GB/s, 4200rpm, -10° to +70°C
SA-Adapters
08SA01-00
08SA02-01
08SA02-07
08SA03-00
08SA03-01
Mass Storage
0751-0028
CompactFlash card, 2 GB, Type I, -40 to +85°C, S.M.A.R.T. interface
0751-0060
CompactFlash card, 16 GB, -40 to +85°C
0754-0011
SSD SATA, 2.5", 256 GB, MLC, -40 °C to +85 °C
Documentation
Data Sheets
User Manuals
Product Comparison
Product Compare Chart: 3U CompactPCI/PlusIO CPU Cards
Product Compare Chart: 3U CompactPCI/PlusIO Extension Cards
Product Compare Chart: 3U CompactPCI/PlusIO Peripheral Cards
Product Compatibility Matrix: CompactPCI/PlusIO CPU Boards and Side Cards
Overview Chart: SA-Adapter Options and Compatibility Matrix
Product Compare Chart: 3U CompactPCI/PlusIO Extension Cards
Product Compare Chart: 3U CompactPCI/PlusIO Peripheral Cards
Product Compatibility Matrix: CompactPCI/PlusIO CPU Boards and Side Cards
Overview Chart: SA-Adapter Options and Compatibility Matrix