Follow Us
NM30 - Fully Managed 8-Port Industrial Ethernet Switch
Rugged Embedded Railway & Automotive Network Box
The NM30 family is a range of 8-port fanless and maintenance-free managed Ethernet switches with IP40 protection, developed specifically for rough environmental conditions in rolling stock and automotive applications.
NM30 Managed 8-Port Rugged Industrial Ethernet Switch
NM30 Managed 8-Port Rugged Industrial Ethernet Switch
NM30 Managed 8-Port Rugged Industrial Ethernet Switch
Main Features
- Fully managed 8-port rugged Ethernet switch
- M12 D, A or X-Coded connectors on the front panel
- 10/100 (Fast) or 10/100/1000 Mbit/s variants
- 29 Gbit/s carrier grade switching matrix
- ITU G.8031/G.8032 Ethernet Linear/Ring Protection
- Fanless and maintenance-free design
- Ultra wide range power supply input (14.4 to 154 VDC) with interruption class S2
- -40°C to +70 (+85)°C with qualified components
- Compliant to EN 50155 (railways)
Technical Data
Supported Port Types
The following configurations are available:
- 8x 10/100BASE-T fully managed switch with D-coded connectors (Model: 09NM30-00)
- 8x 10/100/1000BASE-T fully managed switch with A-coded connectors (Model: 09NM30-02)
- 8x 10/100/1000BASE-T fully managed switch with X-coded connectors (Model: 09NM30-04)
Protocols and Functionality
- IEEE 802.3 for 10BASE-T
- IEEE 802.3u for 100BASE-T
- IEEE 802.3ab for 1000BASE-T
- General Network Support
- IPv4
- IPv6 Ready
- IPv6 Ready Phase 2
- Host Configuration Protocols
- DHCP Server / Client
- DHCP Option 82
- DHCP Snooping
- DHCP ARP Inspection
- DNS
- DNS Client (RFC 2136)
- DNS Proxy (RFC 5625)
Ports and Port Control
- Energy Efficient Ethernet (IEEE 802.3az)
- ETH Signal Equalization and Power Control
- Port state (admin), speed, duplex mode and flow control
- Port frame size (Jumbo Frames: 9216 Bytes max.)
- Port status (link monitoring) and statistics (MIB counters)
- Port VeriPHY (cable diagnostics), ActiPHY and
- PerfectReach
- Inband management (VRAP)
Switch Management and Monitoring
- OAM
- Link OAM: IEEE 802.3ah (a.k.a. EFM)
- CFM: IEEE 802.1ag
- ITU-T Y.1731 Down-MEP, ITU-T Y.1731 Up-MEP, ITU-T Y.1731 MIP
- MEF E-LMI Configuration Management
- SMAC/DMAC Swap
- OAM Performance Monitoring MEF35 Phase 1
- SNMP Management v1, v2c, v3 (RFC 1212, 1901-1908, 3411-3418)
- SNMP v1 Traps (RFC 1157) with multiple destinations
- LLDP (IEEE 802.10AB)
- TIA 1057 LLDP-MED extensions
- CDP (Cisco Discovery Protocol)
- RMON Group 1, 2, 3 and 9 (RFC 2819)
- Syslog (RFC 5424)
- sFlow (RFC 3176)
- Port and Flow Mirroring
- Fallback Firmware
Configuration Management
- TFTP (RFC 1350)
- Fallback Configuration
- Configurable by Web / CLI / Telnet /SSL / Console
Redundancy and Flow Control
- Static Link Aggregation
- IEEE 802.3ad Link Aggregation Protocol
- IEEE 802.3X Back Pressure Flow Control
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid STP (RSTP)
- IEEE 802.1s Multiple STP (MSTP)
- BDPU Guard / Restrict Role
- ITU-T:G.8032 Ring Protection
- ITU-T:G.8031 Linear Protection
- IEEE 802.1ag / ITU-T Y.1731 Connectivity Fault Protection
- Loop Protection
Security
- Network Access Server (NAS):
- Port-based IEEE 802.1x
- Single and multiple IEEE 802.1x
- MAC based authentication
- VLAN and QOS assignment
- Guest VLAN
- RADIUS accounting (RFC 2866ff)
- MAC address limit and MAC freeze
- IP MAC Binding / Binfind dynamic to static
- TACACS+ Accounting
- Web and CLI Authentication
- IP Source guard
- Authorization (15 user levels)
- DHCP Snooping (RFC 2132)
- Dynamic ARP Inspection
VLAN
- VLAN Tagging and Trunking (IEEE 802.1Q)
- Supported VLAN Types:
- Private Static VLAN (RFC 5517)
- MAC, Protocol, IP-Subnet and Port based VLAN (IEEE 802.1Q)
- VOICE VLAN (IEEE 802.1Q, IEEE 802.1P)
- Dynamic VLANs (GVRP)
- Multicast VLAN Registration (IEE 802.1ak MRP and MVRP)
Multicast
- IPv4 Internet Group Management protocol (IGMP) v1, v2, v3
- Maximum number of IGMP Groups:
- 8000 for Layer2
- 8000 for IP4/IP6
- IPv6 Multicast Listener Protocol (MLD) v1, v2
- Multicast VLAN registration protocol (MVR)
- MRP/GMRP Multicast Registration Protocol (IEEE 802.1ak)
QoS
- Active Priority Queues per Port: 8
- Class of Service (IEEE 802.1p)
- Port and queue egress shaper
- Storm control (for Unicast, Broadcast, Multicast, unknown)
- Port and Queue Egress shaper
- Scheduler Mode (weighted and fair scheduling)
- Port Default/User Priority and Input Priority Mapping
- DCSP remarking (RFC 2474)
- QoS control list (QCL mode))
- Random Early Detection (RED, RFC 2309)
- Policers (port, service, queue and global/VCAP - ACL)
- DiffServ (RFC 2474) and Tag remarking
Synchronization
- NTPv4 Client (RFC 5005)
- IEEE 1588v2 PTP with one-step and two-step clock
- IEEE 1588v2 PTP with redundant master clocks
- IEEE 1588v2 boundary clock
- IEEE 1588v2 unicast and multicast support
Service Interface
- Console interface
- RS232 rear console port for local system management
- Web interface
- Web based control and management interface over any Ethernet port
Front Interfaces
- Ethernet
- Eight M12 connectors
- Ethernet LED
- Power supply
- One M12 connector for ultra wide range power
- Power status LED
- Indicates power supply stability or range validity
Rear Interfaces
RS232
- One M12 service console
Electrical Specifications
- Supply voltage
- 14.4 VDC to 154 VDC
- Nominal voltages 24, 36, 48, 72, 96 and 110V VDC, according to EN50155
- Power interruption class S2 (10 ms)
- 18 VDC to 32 VDC
- Power consumption
- +10 W Max.
Mechanical Specifications
- Dimensions: Height 44.1 mm x Width 220 mm x Length 164 mm
- Weight
- 10/100BASE-T managed switch: 1400 g
- 10/100/1000BASE-T managed switch: 1500 g
Environmental Specifications
- IP protection
- IP40 when surface-mounted
- Temperature range (operation)
- -40°C to 70°C (screened), with up to 85°C for 10 minutes according to class Tx (EN 50155)
- Fanless operation
- Temperature range (storage): -40°C to +85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300 m to +3000 m
- Shock: 50 m/s², 30 ms (EN 61373)
- Vibration (function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
- Vibration (lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)
- Conformal coating of internal components
Reliability
MTBF: 511 624 h @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
- Flammability (PCBs)
- UL 94 V-0
- Fire Protection
- EN 45545-2
- Electrical Safety
- EN 50153:2014 / EN 50155:2007
EMC Conformity (Railway)
EN 50121-3-2:2015
Software Support
Firmware for configuration and management included
Ordering Information
Standard NM30 Models
09NM30-00
Fully Managed 8-port 10/100 MBit Ethernet switch with D-Coded M12 connectors, no PoE, 14.4 to 154 VDC, EN 50155 class Tx compliant -40 to +70°C (screened), conformal coating
09NM30-02
Fully Managed 8-port 10/100/1000 MBit Ethernet switch with A-Coded M12 connectors, no PoE, 14.4 to 154 VDC, EN 50155 class Tx compliant -40 to +70°C (screened), conformal coating
09NM30-04
Fully Managed 8-port 10/100/1000 MBit Ethernet switch with X-Coded M12 connectors, no PoE, 14.4 to 154 VDC, EN 50155 class Tx compliant -40 to +70°C (screened), conformal coating
Software
Firmware/BIOS
14ETSW-01
Ethernet Switch Firmware for for G101, NM30 and NH30
Documentation
NM30 Data Sheet
NM30 User Manual
ETSW Firmware Manual
Rugged Ethernet Switches FAQs
Compare Chart: Switch, Router, Gateway & WAP Devices
09NM30-00 R03 3D model (PDF)
09NM30-02 R03 3D model (PDF)
09NM30-04 R03 3D model (PDF)
09NM30-00 R03 3D model (STEP, 32 MB)
09NM30-02 R03 3D model (STEP, 36 MB)
09NM30-04 R03 3D model (STEP, 39 MB)
NM30 User Manual
ETSW Firmware Manual
Rugged Ethernet Switches FAQs
Compare Chart: Switch, Router, Gateway & WAP Devices
09NM30-00 R03 3D model (PDF)
09NM30-02 R03 3D model (PDF)
09NM30-04 R03 3D model (PDF)
09NM30-00 R03 3D model (STEP, 32 MB)
09NM30-02 R03 3D model (STEP, 36 MB)
09NM30-04 R03 3D model (STEP, 39 MB)