Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
(215) 542-9575

14B011-00 - MENMON (Firmware) for B11 (object code)

MENMON (Firmware) for B11 (object code)

Supported MEN Standard Products


Please be aware that you do MENMON updates at your own risk. After an incorrect update your CPU board may not be able to boot.


After a MENMON update, the hardware revision displayed by MENMON will most probably be different from the actual hardware revision of your CPU board, because MENMON follows MEN's hardware revision updates.

Update Instructions

  • Unzip the file "menmon_B011.zip" into a temporary directory.
  • Connect a terminal emulation program with the COM1 port of your target board and set the terminal emulation program to 9600 baud, 8 data bits, 1 stop bit, no parity, no handshaking (if you haven't changed the target baudrate on your own).
  • If your MENMON console is redirected to the AD45/P10 COM1 port, you can use this port for download as well.
  • Power on your target board, and press "ESC" immediately.
  • In your terminal emulation program, you should see the "MenMon>" prompt.
  • Enter "SERDL MENMON". You should now see a "C" character appear every 3 seconds.
  • In your terminal emulation program, start a "YModem" download of file "menmon_B011.smm" (for example, with Windows Hyperterm, select "Transfer|Send File" Protocol="YModem").
  • When the download is completed, reset the target CPU board.

Licensing Information

MEN general licensing conditions

This article is free of charge.

Ordering Information & Downloads

Main Software

MENMON (Firmware) for B11 (object code)

Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).